FSA2466UMX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-UFQFN |
| Number of Pins | 16 |
| Weight | 6.54mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 2.5Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Base Part Number | FSA2466 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 3V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 4.3V |
| Min Supply Voltage | 1.65V |
| Max Supply Current | 100nA |
| Turn On Delay Time | 50 ns |
| Number of Inputs | 4 |
| Supply Type | Single |
| Turn-Off Delay Time | 32 ns |
| -3db Bandwidth | 240MHz |
| On-State Resistance (Max) | 1.6Ohm Typ |
| Multiplexer/Demultiplexer Circuit | 2:2 |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 6pF |
| Switch Circuit | DPDT |
| Switch Time (Ton, Toff) (Max) | 50ns, 32ns |
| Charge Injection | 8pC |
| Channel-to-Channel Matching (ΔRon) | 40m Ω |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~4.45V |
| Drain to Source Resistance | 6Ohm |
| Height | 500μm |
| Length | 2.6mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FSA2466UMX Overview
As the electronic part is packed in 16-UFQFN, international shipping is convenient. High reliability is ensured by the advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:2. Operation at a temperature around -40°C~85°C TA. Totally, there are 16 terminations. DPDT switching circuits are used in these analog switch ics. The circuits in this analogue multiplexer number 2. Look for analog switch ic variants by searching with FSA2466. Internally, this switch multiplexer has a resistance of 2.5Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 4.3V. A cost-effective Single supply type analogue multiplexer. 1.65V is the lowest voltage the electrical component should receive. Analogue multiplexers require a 1.65V~4.45V voltage to drain from a single voltage supply. A voltage higher than 100nA may cause damage to the switch multiplexer. A voltage of 3V can be used to operate the electronic component. The electrical component supports 4 inputs. There is 6Ohm resistance between the Drain and Source on this part. Multiplexer ics with 8 outputs are available.
FSA2466UMX Features
Switch Circuit: DPDT
-3db Bandwidth: 240MHz
Drain-to-Source resistance: 6Ohm
FSA2466UMX Applications
There are a lot of ON Semiconductor FSA2466UMX Analog Switches & Multiplexers ICs applications.
- Relay replacements
- Intelligent PBX
- Communication systems
- Wireless Local Loop
- E1 Network Equipment
- Modems
- HDTV
- Communications systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- 65 V DACs
