FSA3157BFHX
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN |
| Number of Pins | 6 |
| Weight | 20mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Terminal Finish | Nickel/Palladium (Ni/Pd) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 180mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 2.3V |
| Terminal Pitch | 0.35mm |
| Base Part Number | FSA3157 |
| Number of Outputs | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Power Dissipation | 180mW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 5.2 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Turn-Off Delay Time | 3.5 ns |
| -3db Bandwidth | 250MHz |
| On-State Resistance (Max) | 15Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 57 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 6.5pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 5.2ns, 3.5ns |
| Charge Injection | 7pC |
| Channel-to-Channel Matching (ΔRon) | 150m Ω |
| Crosstalk | -54dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height Seated (Max) | 0.55mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
FSA3157BFHX Overview
The electronic component is convenient to ship overseas because it is packed in a 6-UFDFN. High reliability is achieved by using advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there are 6 terminations. A high-quality output is provided by the electrical component's 1 channels. A 2.3V voltage supply should turn on and run the electronic component. A SPDT switching circuit is used for these analog switches. Using the FSA3157 search parameter, you can discover variants of the switch. This digital multiplexer has 15Ohm internal resistance. The functions of 6 pins can be found in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. The analog switch ic is of the Single supply type and is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 1.65V. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. A voltage higher than 1μA may cause damage to the switch multiplexer. Among the inputs that can be operated are the 1 inputs. This digital multiplexer has 2 outputs.
FSA3157BFHX Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 250MHz
FSA3157BFHX Applications
There are a lot of ON Semiconductor FSA3157BFHX Analog Switches & Multiplexers ICs applications.
- Industrial
- FTTH
- Audio and video switching
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- PCMCIA cards
- Routers
- Relay Replacement
- Transmit
- Sample hold systems
- DVD-R
