FSA3157P6X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 28mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 180mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 2.3V |
| Base Part Number | FSA3157 |
| Output Voltage | 5.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Nominal Supply Current | 1μA |
| Power Dissipation | 180mW |
| Max Supply Current | 1μA |
| Propagation Delay | 3.5 ns |
| Turn On Delay Time | 23 ns |
| Number of Inputs | 2 |
| Supply Type | Single |
| Bandwidth | 250MHz |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 12.5 ns |
| On-State Resistance (Max) | 15Ohm |
| High Level Output Current | 128mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 57 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 6.5pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 5.7ns, 3.8ns |
| Charge Injection | 7pC |
| Channel-to-Channel Matching (ΔRon) | 150m Ω |
| Crosstalk | -54dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 7ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Drain to Source Resistance | 10Ohm |
| Height | 1mm |
| Length | 2mm |
| Width | 1.25mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FSA3157P6X Overview
This electronic part is conveniently packaged in 6-TSSOP, SC-88, SOT-363, making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. 2:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~85°C TA. The total number of terminations is 6. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 2.3V volts, the electrical component should be turned on and run. On the other hand, analog switches can be constructed using SPDT switching circuits. Try searching with FSA3157 if you're looking for variants. A 15Ohm internal resistance characterizes this multiplexer. For functions related to 6 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. The digital multiplexer has a low cost Single supply. The lowest voltage fed to the electronic component should be 1.65V. Using a single voltage supply, this switch device consumes 1.65V~5.5V volts. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. It is possible to operate 2 inputs. In 250MHz-bandwidths, data can be transferred. This electronic component presents a Drain to Source resistance of 10Ohm.
FSA3157P6X Features
1 Channels
Switch Circuit: SPDT
Bandwidth: 250MHz
Drain-to-Source resistance: 10Ohm
FSA3157P6X Applications
There are a lot of ON Semiconductor FSA3157P6X Analog Switches & Multiplexers ICs applications.
- Residential Gateways, Home Gateway/Router
- ISDN NT1/TA
- Digital Cross-Connects
- Industrial control systems
- High speed data transmission line cards
- Fiber to the Home
- Cellular phones
- DVD-R
- Battery Powered Systems
- DSLAMs
