Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-WFQFN Exposed Pad |
Number of Pins |
16 |
Weight |
123mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
15Ohm |
Technology |
CMOS |
Terminal Position |
QUAD |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Base Part Number |
FSA3259 |
Number of Outputs |
6 |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.65V |
Analog IC - Other Type |
AUDIO/VIDEO SWITCH |
Nominal Supply Current |
1μA |
Max Supply Current |
20μA |
Number of Bits |
1 |
Turn On Delay Time |
32 ns |
Number of Inputs |
2 |
Supply Type |
Single |
Bandwidth |
250MHz |
Turn-Off Delay Time |
14 ns |
On-State Resistance (Max) |
15Ohm |
Multiplexer/Demultiplexer Circuit |
3:1 |
Off-state Isolation-Nom |
58 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
3.6pF |
On-state Resistance Match-Nom |
0.62Ohm |
Switch Circuit |
SP3T |
Switch Time (Ton, Toff) (Max) |
6.5ns, 3.7ns |
Charge Injection |
3pC |
Channel-to-Channel Matching (ΔRon) |
150m Ω |
Crosstalk |
-60dB @ 10MHz |
Switch-on Time-Max |
34ns |
Voltage - Supply, Single (V+) |
1.65V~5.5V |
Height Seated (Max) |
0.8mm |
Length |
3.5mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
FSA3259BQX Overview
Shipping overseas is convenient due to the electrical component's packing in 16-WFQFN Exposed Pad. The advanced packaging method Tape & Reel (TR) provides high reliability. There is an analog multiplexer mounted in position Surface Mount. 3:1 is the number of circuits in the multiplexer and demultiplexer. Around -40°C~85°C TA is the extended operating temperature. In total, there are 16 terminations. The electronic part provides high-quality output because it has 1 channels. With a 5V voltage supply, the electrical component should be turned on and run. Based on SP3T switching circuits, these analog multiplexers work. Try searching for the analog switch ic with FSA3259 if you are looking for variants. Internally, this switch multiplexer has a resistance of 15Ohm. Datasheets for functions of 16 pins are available. Users should never supply a voltage higher than 5.5V to a switch device. Analogue multiplexer with a Single supply type that is cost-effective. The lowest voltage fed to the electronic component should be 1.65V. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. Put voltage above 20μA on the multiplexer to cause damage. There is an integrated analog IC AUDIO/VIDEO SWITCH in the module. There are 2 inputs to be operated. There are 250MHz bandwidths for data transfer. 6 outputs are included in the analogue multiplexer. 1-bit operation is possible.
FSA3259BQX Features
1 Channels
Switch Circuit: SP3T
Bandwidth: 250MHz
1-Bit
FSA3259BQX Applications
There are a lot of ON Semiconductor FSA3259BQX Analog Switches & Multiplexers ICs applications.
- Modems
- Voice over IP/DSL – Integrated Access Devices, Smart
- DVD-R
- Digital cross connects (DSX-1)
- Cell phones
- Transmit
- Industrial control systems
- Digital access cross connects
- FTTH
- Mechanical reed relay replacement