FSA4157AP6
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 4Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 180mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FSA4157 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 100nA |
| Power Dissipation | 180mW |
| Max Supply Current | 500nA |
| Turn On Delay Time | 60 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 20 ns |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 1.15Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 2nA Typ |
| Channel Capacitance (CS(off), CD(off)) | 12pF |
| On-state Resistance Match-Nom | 0.06Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 35ns, 15ns |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 60m Ω |
| Crosstalk | -70dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 2.7V~5.5V |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
FSA4157AP6 Overview
As the electronic part is packed in 6-TSSOP, SC-88, SOT-363, international shipping is convenient. High reliability is ensured by the advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. A total of 6 terminations have been recorded. High-quality output is provided by the electronic component's 1 channels. An 4.5V voltage supply should allow the electrical part to be turned on and run. Circuits based on SPDT switching are used to construct these analog switch ics. FSA4157 can be used to search for analog multiplexer variants. A 4Ohm internal resistance characterizes this multiplexer. For functions related to 6 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Digital switch that provides Single power at a cost-effective price. 2.7V is the lowest voltage the electrical component should receive. Analogue multiplexers require a 2.7V~5.5V voltage to drain from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 500nA. In this digital multiplexer, there are 2 outputs.
FSA4157AP6 Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 300MHz
FSA4157AP6 Applications
There are a lot of ON Semiconductor FSA4157AP6 Analog Switches & Multiplexers ICs applications.
- Digital access cross connects
- Cable Modem
- Fiber to the Home
- Microprocessor Controlled Analog Systems
- Cell phones
- Battery-powered systems
- DVD-R
- Automotive applications
- High reliability control systems
- Sample hold systems
