FSA4157L6X
| Parameters | |
|---|---|
| Published | 2014 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 1.15Ohm |
| Terminal Finish | Gold/Nickel (Au/Ni) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 180mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | FSA4157 |
| Number of Outputs | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Nominal Supply Current | 100nA |
| Power Dissipation | 180mW |
| Max Supply Current | 500nA |
| Turn On Delay Time | 60 ns |
| Supply Type | Single |
| Bandwidth | 300MHz |
| Turn-Off Delay Time | 20 ns |
| On-State Resistance (Max) | 1.15Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 2nA Typ |
| Channel Capacitance (CS(off), CD(off)) | 12pF |
| On-state Resistance Match-Nom | 0.06Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 35ns, 15ns |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 60m Ω |
| Crosstalk | -70dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height | 1mm |
| Length | 2mm |
| Width | 1.25mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN |
| Number of Pins | 6 |
| Weight | 30g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
FSA4157L6X Overview
The electrical component comes in 6-UFDFN packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Around -40°C~85°C TA is the extended operating temperature. Totally, there are 6 terminations. High-quality output is provided by the electronic component's 1 channels. A 4.5V voltage supply should turn on and run the electronic component. The analog switch ics are built using SPDT switching circuits. If you are looking for variants of the digital switch, trying search with FSA4157. Analog switches have 1.15Ohm internal resistance. Datasheets for 6 pin functions are available upon request. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 5.5V. Digital switch that provides Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 1.65V. The voltage required by this switch device is 1.65V~5.5V, draining from a single voltage supply. When the digital multiplexer is charged above 500nA, damage can occur. 300MHz-bandwidths can be used to transfer data between multiplexers. There are 2 outputs on the analogue multiplexer.
FSA4157L6X Features
1 Channels
Switch Circuit: SPDT
Bandwidth: 300MHz
FSA4157L6X Applications
There are a lot of ON Semiconductor FSA4157L6X Analog Switches & Multiplexers ICs applications.
- PDH Multiplexers
- Optical Applications
- Relay Replacement
- E1 Multiplexer
- Remote Powered Equipment
- Cellular phones
- T1/E1 Terminals
- Central office
- Digital Cross-Connects
- Transmit
