FSA4159L6X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN |
| Number of Pins | 6 |
| Weight | 30g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 900mOhm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 180mW |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | FSA4159 |
| Number of Outputs | 2 |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Nominal Supply Current | 10nA |
| Power Dissipation | 180mW |
| Max Supply Current | 500nA |
| Turn On Delay Time | 35 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Turn-Off Delay Time | 30 ns |
| -3db Bandwidth | 180MHz |
| On-State Resistance (Max) | 900mOhm |
| High Level Output Current | 200mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 60 dB |
| Channel Capacitance (CS(off), CD(off)) | 12pF |
| On-state Resistance Match-Nom | 0.15Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 30ns, 20ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -60dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 75ns |
| Switch-off Time-Max | 50ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height | 500μm |
| Length | 1.45mm |
| Width | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
FSA4159L6X Overview
Packed in 6-UFDFN, the electronic component is convenient for shipping overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 2:1. Around -40°C~85°C TA is the extended operating temperature. Totally, there are 6 terminations. This electronic part offers high-quality output due to its 1 channels. When a voltage supply of 1.8V is used, the electronic component should be turned on and run. The analog switch ics are built using SPDT switching circuits. 1 circuits are used in this analogue multiplexer. Use FSA4159 to search for variants of the digital switches. There is 900mOhm internal resistance in this digital multiplexer. For functions related to 6 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. Digital switch that provides Single power at a cost-effective price. The lowest voltage the electronic part should receive is 1.65V. The voltage required by this switch device is 1.65V~5.5V, draining from a single voltage supply. A voltage higher than 500nA may cause damage to the switch multiplexer. In order to operate the 1 inputs, there are several steps to follow. An output of 2 is provided by the digital multiplexer.
FSA4159L6X Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 180MHz
FSA4159L6X Applications
There are a lot of ON Semiconductor FSA4159L6X Analog Switches & Multiplexers ICs applications.
- Communication systems
- Battery-powered systems
- Precision test equipment
- PBXs
- ATM
- Central office
- Communications systems
- Automotive applications
- Cell phones
- RGB switches
