FSA4159P6X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 28mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 900mOhm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 180mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | FSA4159 |
| Number of Outputs | 2 |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Nominal Supply Current | 10nA |
| Power Dissipation | 180mW |
| Max Supply Current | 50nA |
| Turn On Delay Time | 70 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Bandwidth | 180MHz |
| Turn-Off Delay Time | 40 ns |
| On-State Resistance (Max) | 900mOhm |
| High Level Output Current | 200mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 60 dB |
| Channel Capacitance (CS(off), CD(off)) | 12pF |
| On-state Resistance Match-Nom | 0.15Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 30ns, 20ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -60dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 75ns |
| Switch-off Time-Max | 50ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height | 1mm |
| Length | 2mm |
| Width | 1.25mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
FSA4159P6X Overview
The electronic component is convenient to ship overseas because it is packed in a 6-TSSOP, SC-88, SOT-363. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 2:1. Operational temperature extended around -40°C~85°C TA. Totally, there are 6 terminations. This electronic part offers high-quality output due to its 1 channels. It is safe to turn on and run the electronic component with a 1.8V voltage supply. On the other hand, analog switches can be constructed using SPDT switching circuits. There are 1 circuits in this switch device. Using the FSA4159 search parameter, you can discover variants of the switch. This digital multiplexer has 900mOhm internal resistance. Datasheets for 6 pin functions are available upon request. There is Multiplexer or Switches analog multiplexer like this in the world. Users shouldn't supply more than 5.5V voltage to the switch device. The digital multiplexer has a low cost Single supply. 1.65V is the lowest voltage the electrical component should receive. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. A voltage higher than 50nA may cause damage to the switch multiplexer. The electrical component supports 1 inputs. A 180MHz-bandwidth can be used for data transfer. Multiplexer ics with 2 outputs are available.
FSA4159P6X Features
1 Channels
Switch Circuit: SPDT
Bandwidth: 180MHz
FSA4159P6X Applications
There are a lot of ON Semiconductor FSA4159P6X Analog Switches & Multiplexers ICs applications.
- Avionics and Military Systems
- Frame Relay Equipment
- T1/E1 Terminals
- Microprocessor controlled systems
- Digital cross connects (DSX-1)
- Industrial control systems
- Video switching
- Medical systems
- Public switching systems
- Wireless Local Loop
