FSA839UCX
| Parameters | |
|---|---|
| Lifecycle Status | LIFETIME (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, WLCSP |
| Number of Pins | 6 |
| Weight | 45mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 750mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 180mW |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FSA839 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Power Dissipation | 180mW |
| Max Supply Current | 100nA |
| Turn On Delay Time | 70 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Turn-Off Delay Time | 40 ns |
| -3db Bandwidth | 60MHz |
| On-State Resistance (Max) | 750mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 55 dB |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 50pF |
| On-state Resistance Match-Nom | 0.15Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 25ns, 20ns |
| Charge Injection | 70pC |
| Crosstalk | -55dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| RoHS Status | ROHS3 Compliant |
FSA839UCX Overview
As the electronic part is packed in 6-UFBGA, WLCSP, international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. 2:1 is the ratio between multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there are 6 terminations. As a result of its 1 channels, this electronic component provides high-quality output. With a 1.8V voltage supply, the electrical component should be turned on and run. The analog switch ics are built using SPDT switching circuits. Try searching for the analog switch ic with FSA839 if you are looking for variants. It has an internal resistance of 750mOhm. To find out what the 6 pins do, please refer to the datasheets. Multiplexer or Switches is a typical switch device. Users shouldn't supply more than 5.5V voltage to the switch device. The digital multiplexer has a low cost Single supply. There should be 1.65V voltage fed to the electrical part below 1.65V. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. If put voltage greater than 100nA on the device, damage may be caused to the analogue multiplexer. It is possible to operate 1 inputs. A analog switch ics with 2 outputs is included.
FSA839UCX Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 60MHz
FSA839UCX Applications
There are a lot of ON Semiconductor FSA839UCX Analog Switches & Multiplexers ICs applications.
- Automotive applications
- Medical systems
- Isolation
- Low-Voltage
- Data switching
- SONET/SDH ADM
- Frame Relay Equipment
- Residential Gateways, Home Gateway/Router
- SDH
- PDAs
