banner_page

FSAL200MTCX

20ns, 10ns SPDT 12Ohm DUAL Analog Switches FSAL200 100μA 3.3V 16-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-FSAL200MTCX
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 888
  • Description: 20ns, 10ns SPDT 12Ohm DUAL Analog Switches FSAL200 100μA 3.3V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Weight 173mg
Operating Temperature -40°C~85°C TA
Packaging Cut Tape (CT)
Published 2007
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 12Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Other Logic ICs
Max Power Dissipation 500mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 4
Supply Voltage 3.3V
Base Part Number FSAL200
Number of Outputs 2
Operating Supply Voltage 5V
Number of Circuits 4
Max Supply Voltage 5.5V
Min Supply Voltage 3V
Power Dissipation 500mW
Turn On Delay Time 40 ns
Family FSA
Logic Function Demultiplexer, Multiplexer
Data Rate 51.8 Mbps
Number of Inputs 8
Supply Type Single
Bandwidth 137MHz
Turn-Off Delay Time 20 ns
Output Polarity TRUE
Logic IC Type MULTIPLEXER AND DEMUX/DECODER
On-State Resistance (Max) 12Ohm
Multiplexer/Demultiplexer Circuit 2:1
Current - Leakage (IS(off)) (Max) 100μA
Channel Capacitance (CS(off), CD(off)) 13pF
Switch Circuit SPDT
Switch Time (Ton, Toff) (Max) 20ns, 10ns
Charge Injection 7pC
Channel-to-Channel Matching (ΔRon) 400m Ω
Crosstalk -70dB @ 30MHz
Voltage - Supply, Single (V+) 3V~5.5V
Height 900μm
Length 5mm
Width 4.4mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

FSAL200MTCX Overview


This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. High reliability is provided by advanced packaging method Cut Tape (CT). This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operational temperature extended around -40°C~85°C TA. In total, there are 16 terminations. It is safe to turn on and run the electronic component with a 3.3V voltage supply. A SPDT switching circuit is used for these analog switches. The circuits in this analogue multiplexer number 4. If you are looking for variants of the digital switch, trying search with FSAL200. This digital multiplexer has 12Ohm internal resistance. You can find the functions of the 16 pins in the datasheets. It is a typical Other Logic ICs analog multiplexer. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. The digital multiplexer has a low cost Single supply. The lowest voltage the electronic part should receive is 3V. Using only a single voltage supply, this analog switch requires 3V~5.5V voltage. There is a voltage range of 5V operating voltages for the electrical part. There are 8 inputs to be operated. The transfer of data can be performed over 137MHz bandwidths. An output of 2 is provided by the digital multiplexer.

FSAL200MTCX Features


Switch Circuit: SPDT
Bandwidth: 137MHz

FSAL200MTCX Applications


There are a lot of ON Semiconductor FSAL200MTCX Analog Switches & Multiplexers ICs applications.

  • Cellular phones
  • ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
  • SONET/SDH ADM
  • Battery Powered Instruments
  • Signal routing between systems
  • Data Acquisition Systems
  • Switching Systems
  • Precision test equipment
  • Relay Replacement
  • Channel Banks

Write a review

Note: HTML is not translated!
    Bad           Good