FSAL200QSCX
| Parameters | |
|---|---|
| Length | 5mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-LSSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 288mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 12Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Other Logic ICs |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Base Part Number | FSAL200 |
| Number of Outputs | 2 |
| Output Voltage | 5.5V |
| Operating Supply Voltage | 5V |
| Number of Circuits | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Power Dissipation | 500mW |
| Turn On Delay Time | 40 ns |
| Family | FSA |
| Logic Function | Demultiplexer, Multiplexer |
| Data Rate | 51.8 Mbps |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 137MHz |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 20 ns |
| Output Polarity | TRUE |
| Logic IC Type | MULTIPLEXER AND DEMUX/DECODER |
| On-State Resistance (Max) | 12Ohm |
| High Level Output Current | 120mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 100μA |
| Channel Capacitance (CS(off), CD(off)) | 13pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 20ns, 10ns |
| Charge Injection | 7pC |
| Channel-to-Channel Matching (ΔRon) | 400m Ω |
| Crosstalk | -70dB @ 30MHz |
| Voltage - Supply, Single (V+) | 3V~5.5V |
| Height | 1.357mm |
FSAL200QSCX Overview
Due to its 16-LSSOP (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. 2:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -40°C~85°C TA. The total number of terminations is 16. Powered by a 3.3V voltage supply, the electrical part should be switched on and run. SPDT switching circuits are used in these analog switch ics. 4 circuits are used in this analogue multiplexer. If you are looking for variants of the digital switch, trying search with FSAL200. The internal resistance of this digital multiplexer is 12Ohm. For functions related to 16 pins, please refer to the datasheets. It is a typical Other Logic ICs analog multiplexer. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. An effective Single supply digital multiplexer. 3V should be the lowest voltage fed to the electronic component. This analog switch requires a voltage of 3V~5.5V to drain from a single voltage supply. It can operate from 5V operating voltages. Operating 8 inputs is required. The data can be transferred over a wide range of bandwidths, called 137MHz bandwidths. A analog switch ics with 2 outputs is included.
FSAL200QSCX Features
Switch Circuit: SPDT
Bandwidth: 137MHz
FSAL200QSCX Applications
There are a lot of ON Semiconductor FSAL200QSCX Analog Switches & Multiplexers ICs applications.
- DSLAMs
- SONET
- Public switching systems
- Multiplexers
- Microprocessor controlled systems
- Avionics and Military Systems
- PDAs
- DVD-R
- SONET/SDH ADM
- Avionics test equipment
