FSAU3157P6X
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 15Ohm |
| Max Power Dissipation | 180mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 2.3V |
| Base Part Number | FSAU3157 |
| Number of Outputs | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Power Dissipation | 180mW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 23 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 12.5 ns |
| -3db Bandwidth | 250MHz |
| On-State Resistance (Max) | 15Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 57 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 6.5pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 5.2ns, 3.5ns |
| Charge Injection | 7pC |
| Channel-to-Channel Matching (ΔRon) | 150m Ω |
| Crosstalk | -54dB @ 10MHz |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
FSAU3157P6X Overview
This electronic part is conveniently packaged in 6-TSSOP, SC-88, SOT-363, making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~85°C TA. A total of 6 terminations have been recorded. The electronic part delivers high-quality output through its 1 channels. Turning on and running the electrical part should be easy with a 2.3V voltage supply. SPDT switching circuits are used in these analog switch ics. Try searching with FSAU3157 to find analog multiplexer variants. An switch multiplexer with 15Ohm internal resistance has a value of 15Ohm. Datasheets for 6 pin functions are available upon request. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. 1.65V should be the lowest voltage fed to the electronic component. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. A analog switch ics with 2 outputs is included.
FSAU3157P6X Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 250MHz
FSAU3157P6X Applications
There are a lot of ON Semiconductor FSAU3157P6X Analog Switches & Multiplexers ICs applications.
- Microprocessor Controlled Analog Systems
- Digital Cross-Connects
- Battery Powered Systems
- Mechanical reed relay replacement
- Relay replacements
- Residential Gateways, Home Gateway/Router
- Audio and video routing
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Relay Replacement
- PDH Multiplexers
