banner_page

FSDL321

8 Terminations8V~20V 8 Pin FSDL321 AC to DC power converterFPS? Series 1 Outputs50kHz


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-FSDL321
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 873
  • Description: 8 Terminations8V~20V 8 Pin FSDL321 AC to DC power converterFPS? Series 1 Outputs50kHz (Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Operating Temperature -25°C~85°C TA
Packaging Tube
Series FPS™
JESD-609 Code e3
Part Status Discontinued
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 14Ohm
Terminal Finish Tin (Sn)
Power (Watts) 17W
Max Power Dissipation 1.4W
Terminal Position DUAL
Number of Functions 1
Terminal Pitch 2.54mm
Base Part Number FSDL321
Number of Outputs 1
Input Voltage-Nom 14V
Analog IC - Other Type SWITCHING REGULATOR
Nominal Supply Current 3mA
Power Dissipation 1.4W
Output Current 2A
Voltage - Supply (Vcc/Vdd) 8V~20V
Max Supply Current 3mA
Quiescent Current 3mA
Topology Flyback
Control Mode CURRENT-MODE
Frequency - Switching 50kHz
Max Input Voltage 20V
Control Technique PULSE WIDTH MODULATION
Switcher Configuration SINGLE
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Load, Over Temperature, Over Voltage
Duty Cycle 77%
Output Isolation Isolated
Voltage - Breakdown 650V
Voltage - Start Up 12V
Width 7.62mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

FSDL321 Overview


8-DIP (0.300, 7.62mm) is the package in which the ac to dc converter is embedded.In Tube case, the ac dc converter is available.There is a AC/DC converter mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -25°C~85°C TA in order to ensure its performance.In this AC DC converter, the analog IC type is SWITCHING REGULATOR .When the switching frequency reaches 50kHz , the circuit is closed.Supply voltage (Vcc/Vdd) does not need to exceed 8V~20V .As a result, it has a total of 8 terminations.Approximately 8 pins are present on the ac/dc converter.The ac dc converters are suitable to mount by Through Hole .It is a member of FPS? manufacturer family.If you select the FSDL321 family, you will be able to search similar acdc converters.Running 1 outputs is available.It has been set to 2A for the output current.An input voltage of 20V is available for powering the AC to DC converter.The maximum supply current AC to DC converter can handle is 3mA .The resistance of this power AC DC is 14Ohm .There is no quiescent current consumption at 3mA .

FSDL321 Features


Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 50kHz
With 8 pins
Output Current at 2A
Resistance : 14Ohm

FSDL321 Applications


There are a lot of ON Semiconductor FSDL321 AC DC Converters applications.

  • Laptops
  • Handheld/Battery-Powered Systems
  • RCC SMPS
  • Cellular phone chargers
  • WiFi Wireless
  • Set-top boxes
  • IoT Applications
  • Consumer electronics
  • Auxiliary Power Supplies
  • MPS parts

Write a review

Note: HTML is not translated!
    Bad           Good