FSDM0565RBIWDTU
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | TO-262-6 Formed Leads |
| Number of Pins | 6 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| Series | FPS™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | Through Hole |
| Resistance | 1.76Ohm |
| Power Rating | 70W |
| Max Power Dissipation | 70W |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Base Part Number | FSDM0565 |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Max Output Current | 2A |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 75W |
| Output Current | 2.8A |
| Voltage - Supply (Vcc/Vdd) | 8V~20V |
| Max Supply Current | 2.5mA |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 66kHz |
| Max Input Voltage | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage |
| Duty Cycle | 82% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 650V |
| Voltage - Start Up | 12V |
| Max Input Voltage (AC) | 265V |
| Length | 9.9mm |
| Width | 4.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
FSDM0565RBIWDTU Overview
A ac to dc converter of the package TO-262-6 Formed Leads contains the ac to dc converter.The AC/DC power converter is available in Tube .There is a AC/DC converter mounted in the way of Surface Mount .The ac dc converter needs to be operated at -25°C~85°C TA °C in order to perform.This AC DC converter employs SWITCHING REGULATOR analog IC type.Switching frequency reaches 66kHz Hz.This AC/DC converter is suitable for operation in the range of 8V~20V supply voltage (Vcc/Vdd).There are a total of 6 terminations.The ac/dc converter has 6 pins.Through Hole is the recommended mounting method for the ac dc converters.A member of the FPS? manufacturer family, it has the following characteristics.You can search similar acdc converters based on FSDM0565 family.There are 1 outputs to run.It has been set to 2.8A for the output current.There is 5V output voltage from this AC/DC converter.This is the standard of REACH SVHC : No SVHC .Input voltage for the AC to DC converter is available under 20V .It is possible to operate the AC to DC inverter with an input voltage that is less than 85V V.Approximately 2.5mA amps of supply current can be handled by the power AC DC.It is recommended to keep the voltage (AC) that can be applied to the AC to DC power converter below 265V .It is possible to determine the resistance of this power AC DC to be 1.76Ohm .
FSDM0565RBIWDTU Features
Packaged with TO-262-6 Formed Leads
Switching Frequency at 66kHz
With 6 pins
Output Current at 2.8A
Resistance : 1.76Ohm
FSDM0565RBIWDTU Applications
There are a lot of ON Semiconductor FSDM0565RBIWDTU AC DC Converters applications.
- AC/DC Adaptors/Chargers for E-books
- Remotely-controlled appliances
- Auxiliary Power Supplies
- Linear Adapter Replacements
- Battery chargers for media tablets
- Standby power supplies for IR
- Smartphones
- AC?DC USB chargers for Cameras
- Switching AC-DC Charger
- ZigBee
