Parameters |
Max Supply Current |
2.5mA |
Quiescent Current |
2.5mA |
Turn On Delay Time |
22 ns |
Max Output Voltage |
650V |
Topology |
Flyback |
Min Input Voltage |
300mV |
Control Mode |
CURRENT-MODE |
Max Input Voltage |
20V |
Control Technique |
PULSE WIDTH MODULATION |
Nominal Input Voltage |
20V |
Turn-Off Delay Time |
95 ns |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Load, Over Temperature, Over Voltage |
Max Duty Cycle |
85 % |
Duty Cycle |
82% |
Output Isolation |
Isolated |
Voltage - Start Up |
12V |
Min Input Voltage (AC) |
85V |
Max Input Voltage (AC) |
265V |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE, NOT REC (Last Updated: 6 days ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
TO-220-6 Full Pack, Formed Leads |
Number of Pins |
6 |
Weight |
1.6g |
Operating Temperature |
-25°C~85°C TA |
Packaging |
Tube |
Published |
2007 |
Series |
FPS™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Not For New Designs |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
Termination |
Through Hole |
ECCN Code |
EAR99 |
Resistance |
1.76Ohm |
Terminal Finish |
Tin (Sn) |
Power Rating |
70W |
Max Power Dissipation |
45W |
Terminal Position |
ZIG-ZAG |
Number of Functions |
1 |
Current Rating |
2.3A |
Frequency |
66kHz |
Base Part Number |
FSDM0565 |
Number of Outputs |
1 |
Output Voltage |
650V |
Max Output Current |
2.8A |
Operating Supply Voltage |
20V |
Input Voltage-Nom |
14V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Nominal Supply Current |
2.5mA |
Power Dissipation |
45W |
Output Current |
2.8A |
Voltage - Supply (Vcc/Vdd) |
8V~20V |
FSDM0565RBWDTU Overview
An embedded ac to dc converter is included in TO-220-6 Full Pack, Formed Leads package.Tube case is available for the ac dc converter.In this case, the AC/DC converter is mounted in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of -25°C~85°C TA degrees Celsius.Analog IC type SWITCHING REGULATOR is utilized in this AC DC converter.A range of 8V~20V supply voltages (Vcc/Vdd) can be used.There have been 6 terminations of this program.Approximately 6 pins are present on the ac/dc converter.There are no problem mounting the ac dc converters by Through Hole .The product is acdc converter of the FPS? manufacturer family.If you select the FSDM0565 family, you will be able to search similar acdc converters.A total of 1 outputs are available for processing.Currently, the output current is set to 2.8A .The output voltage of the AC/DC converter is 650V .A high efficiency can be achieved by operating at a frequency of 66kHz .This is the standard of REACH SVHC : No SVHC .An input voltage of 20V is available for powering the AC to DC converter.A voltage of less than 300mV V can be used with the AC to DC inverter.As soon as the supply voltage drops to 20V , the interface IC conducts.AC to DC converter can handle a maximum supply current of 2.5mA .An input voltage (AC) should be applied under 265V to the AC to DC power converter.The resistance of this power AC DC is 1.76Ohm .Quiescent current is consumed at 2.5mA .
FSDM0565RBWDTU Features
Packaged with TO-220-6 Full Pack, Formed Leads
With 6 pins
Output Current at 2.8A
Operating Supply Voltage at the range of 20V
Resistance : 1.76Ohm
FSDM0565RBWDTU Applications
There are a lot of ON Semiconductor FSDM0565RBWDTU AC DC Converters applications.
- Power adapters for network devices
- Automotive Infotainment
- Set -Top Box (STB) Power Supply
- Dimmers
- Appliances
- AC/DC Adaptors/Chargers for Cell Phones
- USB-PD 2.0
- AC/DC Adaptors/Chargers for PDAs
- Standby power
- Adapter/Charger for Cordless Phones