Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE, NOT REC (Last Updated: 6 days ago) |
Mount |
Through Hole |
Mounting Type |
Surface Mount |
Package / Case |
TO-220-6 Full Pack, Formed Leads |
Number of Pins |
6 |
Weight |
1.6g |
Operating Temperature |
-25°C~85°C TA |
Packaging |
Tube |
Series |
FPS™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Not For New Designs |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
2.2Ohm |
Terminal Finish |
Tin (Sn) |
Power (Watts) |
70W |
Max Power Dissipation |
45W |
Terminal Position |
ZIG-ZAG |
Number of Functions |
1 |
Frequency |
66kHz |
Base Part Number |
FSDM0565 |
Number of Outputs |
1 |
Output Voltage |
650V |
Operating Supply Voltage |
20V |
Input Voltage-Nom |
14V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Operating Supply Current |
2.5mA |
Nominal Supply Current |
2.5mA |
Power Dissipation |
45W |
Output Current |
2.8A |
Voltage - Supply (Vcc/Vdd) |
8V~20V |
Topology |
Flyback |
Control Mode |
CURRENT-MODE |
Control Technique |
PULSE WIDTH MODULATION |
Rise Time |
52ns |
Fall Time (Typ) |
50 ns |
Nominal Input Voltage |
20V |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Load, Over Temperature, Over Voltage |
Max Duty Cycle |
87 % |
Duty Cycle |
82% |
Output Isolation |
Isolated |
Voltage - Start Up |
12V |
Height |
9.19mm |
Length |
10.36mm |
Width |
4.8mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
FSDM0565REWDTU Overview
A ac to dc converter of the package TO-220-6 Full Pack, Formed Leads contains the ac to dc converter.Tube case is available for the ac dc converter.As you can see, this AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -25°C~85°C TA °C.SWITCHING REGULATOR analog ICs are employed in this AC DC converter.As long as the supply voltage (Vcc/Vdd) is within the range of 8V~20V , the AC/DC converter may be used.As a result, it has a total of 6 terminations.There are 6 pins on the ac/dc converter.It is suitable for mounting by Through Hole .Currently, it is acdc converter of the manufacturer family of FPS? .If you select the FSDM0565 family, you will be able to search for similar acdc converters.In this AC to DC transformer, there are 1 outputs to run.Currently, the output current is set to 2.8A .Its output voltage is650V .The power AC DC is capable of high efficiency when operated at a frequency of 66kHz .You can read the standard of REACH SVHC : No SVHC .It is possible for the interface IC to conduct when the supply voltage is 20V .The resistance of this power AC DC can be determined to be 2.2Ohm .
FSDM0565REWDTU Features
Packaged with TO-220-6 Full Pack, Formed Leads
With 6 pins
Output Current at 2.8A
Operating Supply Voltage at the range of 20V
Resistance : 2.2Ohm
FSDM0565REWDTU Applications
There are a lot of ON Semiconductor FSDM0565REWDTU AC DC Converters applications.
- AC-DC Output Power Conversion Applications
- Battery chargers for mobile devices with touchpad display
- Set -Top Box (STB) Power Supply
- Remotely-controlled appliances
- Tablets
- Battery chargers for cordless
- Z-Wave
- Standby power supplies for TV
- Low power ac?dc Adapters for Chargers
- Set Top Boxes (STB)