banner_page

FSDM1265RBWDTU

6 Terminations8V~20V 6 Pin FSDM1265 AC to DC power converterFPS? Series 1 Outputs66kHz


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-FSDM1265RBWDTU
  • Package: TO-220-6 Full Pack, Formed Leads
  • Datasheet: PDF
  • Stock: 500
  • Description: 6 Terminations8V~20V 6 Pin FSDM1265 AC to DC power converterFPS? Series 1 Outputs66kHz (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE, NOT REC (Last Updated: 1 week ago)
Mount Through Hole
Mounting Type Surface Mount
Package / Case TO-220-6 Full Pack, Formed Leads
Number of Pins 6
Weight 1.6g
Operating Temperature -25°C~85°C TA
Packaging Tube
Published 2005
Series FPS™
JESD-609 Code e3
Pbfree Code yes
Part Status Not For New Designs
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Resistance 900mOhm
Terminal Finish Tin (Sn)
Power (Watts) 110W
Max Power Dissipation 50W
Terminal Position ZIG-ZAG
Number of Functions 1
Base Part Number FSDM1265
Number of Outputs 1
Input Voltage-Nom 10V
Analog IC - Other Type SWITCHING REGULATOR
Nominal Supply Current 5mA
Power Dissipation 50W
Output Current 5.3A
Voltage - Supply (Vcc/Vdd) 8V~20V
Max Supply Current 5mA
Input Voltage (Min) 9V
Topology Flyback
Control Mode CURRENT-MODE
Frequency - Switching 66kHz
Control Technique PULSE WIDTH MODULATION
Switcher Configuration SINGLE
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Load, Over Temperature, Over Voltage
Duty Cycle 82%
Output Isolation Isolated
Voltage - Breakdown 650V
Voltage - Start Up 12V
Height 9.4mm
Length 10.1mm
Width 4.7mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

FSDM1265RBWDTU Overview


There is a ac to dc converter embedded in package TO-220-6 Full Pack, Formed Leads .The ac dc converter is available in Tube case.The AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -25°C~85°C TA °C.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.As soon as the switching frequency reaches 66kHz , the circuit is closed.This AC/DC converter is designed for use within the range of 8V~20V supply voltage (Vcc/Vdd).A total of 6 terminations have been recorded.The ac/dc converter has 6 pins.Through Hole is the recommended mounting method for the ac dc converters.It is a member of FPS? manufacturer family.If you select the FSDM1265 family, you will be able to search for similar acdc converters.A total of 1 outputs need to be run.The output current is set to 5.3A .There is a maximum supply current of 5mA that AC to DC converter can handle.It is possible to determine the resistance of this power AC DC to be 900mOhm .

FSDM1265RBWDTU Features


Packaged with TO-220-6 Full Pack, Formed Leads
Switching Frequency at 66kHz
With 6 pins
Output Current at 5.3A
Resistance : 900mOhm

FSDM1265RBWDTU Applications


There are a lot of ON Semiconductor FSDM1265RBWDTU AC DC Converters applications.

  • Home appliances
  • Power Adaptors
  • Battery chargers for smart phones
  • Tablets
  • Laptops
  • Small off-line low voltage power supplies
  • Vacuum Cleaner
  • AC/DC Adaptors/Chargers for Cell Phones
  • ATX/BTX Auxiliary Power
  • Chargers for cell/cordless phones

Write a review

Note: HTML is not translated!
    Bad           Good