FSFM260N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 930mg |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| Series | FPS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 2.2Ohm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 35W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Current Rating | 2.8A |
| Base Part Number | FSFM260 |
| Number of Outputs | 1 |
| Output Voltage | 650V |
| Operating Supply Voltage | 21V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 3mA |
| Nominal Supply Current | 3mA |
| Power Dissipation | 1.5W |
| Output Current | 1.32A |
| Voltage - Supply (Vcc/Vdd) | 8V~21V |
| Max Supply Current | 5mA |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 67kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Fall Time (Typ) | 16 ns |
| Switcher Configuration | SINGLE |
| Max Output Power | 26W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 83 % |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12V |
| Min Breakdown Voltage | 650V |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FSFM260N Overview
This ac to dc converter is included in the package 8-DIP (0.300, 7.62mm) .You can get it in AC/DC power converter Tube .In this case, the AC/DC converter is mounted in the way of Through Hole .To deliver its performance, the ac dc converter should be operated at a temperature of -25°C~85°C TA .In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .The switching frequency reaches 67kHz .The AC/DC converter is capable of being used when the supply voltage is 8V~21V (Vcc/Vdd).As a result, it has a total of 8 terminations.There are 8 pins on this ac/dc converter.There are no problem mounting the ac dc converters by Through Hole .It belongs to the manufacturer family of FPS? .Based on the FSFM260 family, you can search for similar acdc converters.Running 1 outputs is available.Current output is set to 1.32A .Its output voltage amounts to 650V .When the supply voltage is 21V , the interface IC conducts.The maximum supply current is 5mA .As a result, this power AC DC's resistance is 2.2Ohm .It is possible to use the AC to DC power converter with a maximum output power of 26W .
FSFM260N Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 67kHz
With 8 pins
Output Current at 1.32A
Operating Supply Voltage at the range of 21V
Resistance : 2.2Ohm
FSFM260N Applications
There are a lot of ON Semiconductor FSFM260N AC DC Converters applications.
- Battery chargers for cellular phones
- Switching AC-DC Adapter
- Shaver Charger
- Small off-line low voltage power supplies
- LED lights
- Laptops and personal digital assistants
- Universal input AC/DC adapters (15W - 45W)
- PDAs
- Low power ac?dc Adapters for Chargers
- Auxiliary Power Supply
