Parameters |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Operating Temperature |
-25°C~85°C TA |
Packaging |
Tube |
Series |
FPS™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
Terminal Finish |
MATTE TIN |
Power (Watts) |
35W |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Pin Count |
8 |
JESD-30 Code |
R-PDIP-T8 |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Voltage - Supply (Vcc/Vdd) |
8V~21V |
Topology |
Flyback |
Control Mode |
CURRENT-MODE |
Output Current-Max |
1.68A |
Frequency - Switching |
67kHz |
Control Technique |
PULSE WIDTH MODULATION |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Load, Over Temperature, Over Voltage |
Duty Cycle |
77% |
Output Isolation |
Isolated |
Voltage - Breakdown |
700V |
Voltage - Start Up |
12V |
Height Seated (Max) |
5.08mm |
Length |
9.415mm |
Width |
7.62mm |
RoHS Status |
ROHS3 Compliant |
FSFM261N Overview
There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm) .Tube case is available for the ac dc converter.As you can see, this AC/DC converter is mounted in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -25°C~85°C TA °C.In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .67kHz is the switching frequency.Vcc/Vdd can be used within the range of 8V~21V supply voltage.As a result, it has a total of 8 terminations.The pins of the ac-dc converter count up to 8 .It belongs to a manufacturer family of FPS? .A maximum current of 1.68A may be supplied to the ac to dc inverter.
FSFM261N Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 67kHz
FSFM261N Applications
There are a lot of Rochester Electronics, LLC FSFM261N AC DC Converters applications.
- Standby Power Supply
- LED lights
- PDAs
- Low power ac?dc Adapters for Chargers
- Adaptors for DSCs
- RCC SMPS
- Automotive Clusters
- Chargers for cell/cordless phones
- ZigBee
- Set-top boxes