FSGM0565RBWDTU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-6 Full Pack, Formed Leads |
| Number of Pins | 6 |
| Weight | 1.6g |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2016 |
| Series | FPS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 1.8Ohm |
| Terminal Finish | Tin (Sn) |
| Power (Watts) | 80W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 45W |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Base Part Number | FSGM0565R |
| Number of Outputs | 1 |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 45W |
| Output Current | 2.75A |
| Voltage - Supply (Vcc/Vdd) | 7.5V~26V |
| Max Supply Current | 2mA |
| Turn On Delay Time | 14 ns |
| Topology | Flyback |
| Min Input Voltage | 26V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 66kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Turn-Off Delay Time | 32 ns |
| Switcher Configuration | SINGLE |
| Max Output Power | 70W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 75 % |
| Duty Cycle | 70% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12V |
| Min Breakdown Voltage | 650V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
FSGM0565RBWDTU Overview
It is embedded in package TO-220-6 Full Pack, Formed Leads .There is a AC/DC power converter of Tube available.The AC/DC converter is mounted in the way of Through Hole .The ac dc converter needs to be operated at -40°C~125°C TJ °C in order to perform.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.When the switching frequency reaches 66kHz , the process is complete.It can be used within the range of 7.5V~26V supply voltage (Vcc/Vdd).As a result, it has had 6 terminations.The ac/dc converter has 6 pins.Through Hole is the recommended mounting method for the ac dc converters.This AC to DC converter belongs to the FPS? family of manufacturers.Based on the FSGM0565R family, you can search for similar acdc converters.There are 1 outputs to be run.Switching Regulator or Controllers contains the ac to dc conversions.AC to DC converter is set to 2.75A for the output current.Input voltages less than 26V volts can be used to operate the AC to DC inverter.The maximum supply current is 2mA .It is possible to determine the resistance of this power AC DC to be 1.8Ohm .The AC to DC power converter can be used with the max output power of 70W .
FSGM0565RBWDTU Features
Packaged with TO-220-6 Full Pack, Formed Leads
Switching Frequency at 66kHz
With 6 pins
Output Current at 2.75A
Resistance : 1.8Ohm
FSGM0565RBWDTU Applications
There are a lot of ON Semiconductor FSGM0565RBWDTU AC DC Converters applications.
- Standby Power Supplies
- Set-top boxes
- Replaces linear transformers
- Humidifier
- MP3
- Adapter/Charger for Cell
- Chargers for cell/cordless phones
- Standby power supplies for TV
- AC?DC USB chargers for Cell Phones
- Small off-line low voltage power supplies
