banner_page

FSGM0565RLDTU

6 Terminations7.5V~26V 6 Pin FSGM0565R AC to DC power converterFPS? Series 1 Outputs66kHz


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-FSGM0565RLDTU
  • Package: TO-220-6 Full Pack, Formed Leads
  • Datasheet: -
  • Stock: 826
  • Description: 6 Terminations7.5V~26V 6 Pin FSGM0565R AC to DC power converterFPS? Series 1 Outputs66kHz (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 20 hours ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case TO-220-6 Full Pack, Formed Leads
Number of Pins 6
Weight 3.006g
Operating Temperature -40°C~125°C TJ
Packaging Tube
Published 2016
Series FPS™
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Resistance 2.2Ohm
Terminal Finish Tin (Sn)
Power (Watts) 80W
Subcategory Switching Regulator or Controllers
Max Power Dissipation 45W
Terminal Position ZIG-ZAG
Number of Functions 1
Base Part Number FSGM0565R
Number of Outputs 1
Input Voltage-Nom 14V
Voltage 26V
Analog IC - Other Type SWITCHING CONTROLLER
Nominal Supply Current 1.6mA
Current 2.2A
Power Dissipation 45W
Output Current 2A
Voltage - Supply (Vcc/Vdd) 7.5V~26V
Max Supply Current 2mA
Turn On Delay Time 14 ns
Topology Flyback
Min Input Voltage 26V
Control Mode CURRENT-MODE
Frequency - Switching 66kHz
Control Technique PULSE WIDTH MODULATION
Turn-Off Delay Time 32 ns
Switcher Configuration SINGLE
Max Output Power 60W
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit
Max Duty Cycle 75 %
Duty Cycle 70%
Output Isolation Isolated
Voltage - Start Up 12V
Min Breakdown Voltage 650V
Height 16.08mm
Length 10.36mm
Width 4.8mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

FSGM0565RLDTU Overview


There is a ac to dc converter embedded in package TO-220-6 Full Pack, Formed Leads .The ac dc converter is available in Tube case.Through Hole mounts this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -40°C~125°C TJ °C in order to achieve its full performance.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.There is 66kHz switching frequency.The AC/DC converter is capable of being used when the supply voltage is 7.5V~26V (Vcc/Vdd).There are a total of 6 terminations in it.In this ac/dc converter, there are 6 pins.It are possible to mount thare ac dc converters by Through Hole .It is a member of FPS? manufacturer family.It is possible to search for similar acdc converters by using the FSGM0565R family.There are 1 outputs to run.Switching Regulator or Controllers includes the ac to dc conversions.AC to DC converter is set to 2A for the output current.An input voltage of less than 26V volts is acceptable for use with this AC to DC inverter.There is a maximum current limAC to DC converter of 2mA for the supply.It can be determined that this power AC DC has a resistance of 2.2Ohm .The AC to DC power converter can be used with the max output power of 60W .

FSGM0565RLDTU Features


Packaged with TO-220-6 Full Pack, Formed Leads
Switching Frequency at 66kHz
With 6 pins
Output Current at 2A
Resistance : 2.2Ohm

FSGM0565RLDTU Applications


There are a lot of ON Semiconductor FSGM0565RLDTU AC DC Converters applications.

  • Standby and Auxiliary Power Supplies Set Top Boxes (STB)
  • Automotive Telematics
  • Smartphones
  • ZigBee
  • Set-top boxes
  • Linear Adapter Replacements
  • Chargers for cell/cordless phones
  • AC/DC Adaptors/Chargers for E-books
  • AC/DC LED Driver applications
  • AC?DC USB chargers for Cameras

Write a review

Note: HTML is not translated!
    Bad           Good