FSGM0565RWDTU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 20 hours ago) |
| Mount | Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | TO-220-6 Full Pack, Formed Leads |
| Number of Pins | 6 |
| Weight | 1.6g |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2016 |
| Series | FPS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 1.8Ohm |
| Terminal Finish | Tin (Sn) |
| Power (Watts) | 80W |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 70W |
| Max Power Dissipation | 45W |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Base Part Number | FSGM0565R |
| Number of Outputs | 1 |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 1.6mA |
| Current | 2.2A |
| Power Dissipation | 45W |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 7.5V~26V |
| Max Supply Current | 2mA |
| Turn On Delay Time | 14 ns |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 66kHz |
| Input Voltage (Max) | 23V |
| Control Technique | PULSE WIDTH MODULATION |
| Turn-Off Delay Time | 32 ns |
| Switcher Configuration | SINGLE |
| Max Output Power | 60W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 75 % |
| Duty Cycle | 70% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12V |
| Min Breakdown Voltage | 650V |
| Height | 16.07mm |
| Length | 10.16mm |
| Width | 4.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
FSGM0565RWDTU Overview
A ac to dc converter of the package TO-220-6 Full Pack, Formed Leads contains the ac to dc converter.There is a AC/DC power converter of Tube available.In this case, the AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~125°C TJ °C in order to achieve its full performance.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.As soon as the switching frequency reaches 66kHz , the circuit is closed.Vcc/Vdd can be used within the range of 7.5V~26V supply voltage.It has a total of 6 terminations.Approximately 6 pins are present on the ac/dc converter.It are possible to mount thare ac dc converters by Through Hole .It is a member of FPS? manufacturer family.Similar acdc converters can be found using the FSGM0565R family.In this AC to DC transformer, there are 1 outputs to run.AC to DC converter is included in Switching Regulator or Controllers .Currently, the output current is set to 2A .Using a unique technique, a voltage with a maximum value of 23V can be ensured.AC to DC converter can handle a maximum supply current of 2mA .It is possible to determine the resistance of this power AC DC to be 1.8Ohm .With a maximum output power of 60W , the AC to DC power converter can be used.
FSGM0565RWDTU Features
Packaged with TO-220-6 Full Pack, Formed Leads
Switching Frequency at 66kHz
With 6 pins
Output Current at 2A
Resistance : 1.8Ohm
FSGM0565RWDTU Applications
There are a lot of ON Semiconductor FSGM0565RWDTU AC DC Converters applications.
- Shaver Charger
- 3.3V power supplies
- Set -Top Box (STB) Power Supply
- Standby power supplies for VCR
- Digital cameras
- Standby power supplies for TV
- Replacements for bulky plug-in transformers
- Power adapters for monitors
- Automotive Clusters
- Low power ac?dc Adapters for Chargers
