FSGM0765RLDTU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 21 hours ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-6 Full Pack, Formed Leads |
| Number of Pins | 6 |
| Weight | 3.006g |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2016 |
| Series | FPS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 1.6Ohm |
| Terminal Finish | Tin (Sn) |
| Power (Watts) | 90W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 45W |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Base Part Number | FSGM0765R |
| Number of Outputs | 1 |
| Input Voltage-Nom | 14V |
| Voltage | 26V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 1.6mA |
| Current | 2.6A |
| Power Dissipation | 45W |
| Output Current | 2.37A |
| Voltage - Supply (Vcc/Vdd) | 7.5V~26V |
| Max Supply Current | 2mA |
| Turn On Delay Time | 16 ns |
| Topology | Flyback |
| Min Input Voltage | 26V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 66kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Turn-Off Delay Time | 39 ns |
| Switcher Configuration | SINGLE |
| Max Output Power | 70W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 75 % |
| Duty Cycle | 70% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12V |
| Min Breakdown Voltage | 650V |
| Height | 16.08mm |
| Length | 10.36mm |
| Width | 4.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
FSGM0765RLDTU Overview
It is embedded in package TO-220-6 Full Pack, Formed Leads .The AC/DC power converter type is Tube .A AC/DC converter of this type is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~125°C TJ in order to ensure its performance.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.When the switching frequency reaches 66kHz , the process is complete.Supply voltage (Vcc/Vdd) does not need to exceed 7.5V~26V .Total terminations are 6 .On this ac/dc converter, there are 6 pins.Through Hole is the recommended mounting method for the ac dc converters.A member of the FPS? manufacturer family, it has the following characteristics.The FSGM0765R family allows you to search for similar acdc converters.The number of outputs to run is 1 .Switching Regulator or Controllers includes the ac to dc conversions.The output current is set to 2.37A .It is possible to operate the AC to DC inverter with an input voltage that is less than 26V V.The maximum supply current is 2mA .This power AC DC's resistance can be determined to be 1.6Ohm .Using the AC to DC power converter with the maximum output power of 70W is possible.
FSGM0765RLDTU Features
Packaged with TO-220-6 Full Pack, Formed Leads
Switching Frequency at 66kHz
With 6 pins
Output Current at 2.37A
Resistance : 1.6Ohm
FSGM0765RLDTU Applications
There are a lot of ON Semiconductor FSGM0765RLDTU AC DC Converters applications.
- Automotive Infotainment
- AC?DC USB chargers for Tablets
- Standby power supplies for VCR
- Consumer electronics
- Handheld/Battery-Powered Systems
- Wall switches
- RCC SMPS
- Low power ac?dc Adapters for Chargers
- 3.3V power supplies
- Auxiliary Power Supply
