Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 22 hours ago) |
Mount |
Through Hole |
Mounting Type |
Surface Mount |
Package / Case |
TO-220-6 Full Pack, Formed Leads |
Number of Pins |
6 |
Weight |
3.61g |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tube |
Published |
2016 |
Series |
FPS™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
1.6Ohm |
Terminal Finish |
Tin (Sn) |
Power (Watts) |
90W |
Subcategory |
Switching Regulator or Controllers |
Power Rating |
70W |
Max Power Dissipation |
45W |
Terminal Position |
ZIG-ZAG |
Number of Functions |
1 |
Base Part Number |
FSGM0765R |
Number of Outputs |
1 |
Input Voltage-Nom |
14V |
Voltage |
265V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Nominal Supply Current |
1.6mA |
Current |
6.4A |
Power Dissipation |
45W |
Output Current |
2.37A |
Voltage - Supply (Vcc/Vdd) |
7.5V~26V |
Max Supply Current |
2mA |
Turn On Delay Time |
16 ns |
Topology |
Flyback |
Min Input Voltage |
26V |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
66kHz |
Control Technique |
PULSE WIDTH MODULATION |
Turn-Off Delay Time |
39 ns |
Switcher Configuration |
SINGLE |
Max Output Power |
70W |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
Max Duty Cycle |
75 % |
Duty Cycle |
70% |
Output Isolation |
Isolated |
Voltage - Start Up |
12V |
Min Breakdown Voltage |
650V |
Height |
16.07mm |
Length |
10.36mm |
Width |
4.8mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
FSGM0765RUDTU Overview
This ac to dc converter is included in the package TO-220-6 Full Pack, Formed Leads .In Tube case, the ac dc converter is available.Surface Mount mounts this AC/DC converter.The ac dc converter should be operated at a temperature of -40°C~125°C TJ °C to deliver its optimal performance.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.Switching frequency reaches 66kHz Hz.The AC/DC converter is capable of being used when the supply voltage is 7.5V~26V (Vcc/Vdd).It has a total of 6 terminations.There are 6 pins on the ac/dc converter.The ac dc converters is suitable for mounting by Through Hole .This AC to DC converter belongs to the FPS? family of manufacturers.A similar acdc converter can be searched by using the FSGM0765R family.In this AC to DC transformer, there are 1 outputs to run.The following ac to dc conversions are contained in Switching Regulator or Controllers .2.37A is set as the output current.A voltage of less than 26V V can be used with the AC to DC inverter.The maximum supply current is 2mA .It is possible to determine the resistance of this power AC DC to be 1.6Ohm .It is possible to use the AC to DC power converter with a maximum output power of 70W .
FSGM0765RUDTU Features
Packaged with TO-220-6 Full Pack, Formed Leads
Switching Frequency at 66kHz
With 6 pins
Output Current at 2.37A
Resistance : 1.6Ohm
FSGM0765RUDTU Applications
There are a lot of ON Semiconductor FSGM0765RUDTU AC DC Converters applications.
- Air conditioners
- MPS parts
- Adapter for ADSL
- AC/DC LED Driver applications
- Power adapters for network devices
- Wireless System
- Switching AC-DC Adapter
- Automotive Clusters
- Universal input AC/DC adapters (15W - 45W)
- 3.3V power supplies