FSGM0765RWDTU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | TO-220-6 Full Pack, Formed Leads |
| Number of Pins | 6 |
| Weight | 1.6g |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2016 |
| Series | FPS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 1.6Ohm |
| Terminal Finish | Tin (Sn) |
| Power (Watts) | 90W |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 70W |
| Max Power Dissipation | 45W |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Base Part Number | FSGM0765R |
| Number of Outputs | 1 |
| Output Voltage | 650V |
| Input Voltage-Nom | 14V |
| Voltage | 265V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 1.6mA |
| Current | 6.4A |
| Power Dissipation | 45W |
| Output Current | 2.37A |
| Voltage - Supply (Vcc/Vdd) | 7.5V~26V |
| Max Supply Current | 2mA |
| Turn On Delay Time | 16 ns |
| Topology | Flyback |
| Min Input Voltage | 26V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 66kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Turn-Off Delay Time | 39 ns |
| Switcher Configuration | SINGLE |
| Max Output Power | 70W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 75 % |
| Duty Cycle | 70% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12V |
| Min Breakdown Voltage | 650V |
| Height | 16.07mm |
| Length | 10.16mm |
| Width | 4.8mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
FSGM0765RWDTU Overview
The ac to dc converter is embedded in TO-220-6 Full Pack, Formed Leads package.You can get it in AC/DC power converter Tube .Surface Mount is mounted in the way of this AC/DC converter.Ideally, the ac dc converter should be operated at a temperature of -40°C~125°C TJ degrees Celsius.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.When the switching frequency reaches 66kHz , the circuit is closed.Vcc/Vdd can be used within the range of 7.5V~26V supply voltage.There have been 6 terminations of this program.The ac/dc converter has a total of 6 pins.Through Hole is the recommended mounting method for the ac dc converters.This AC to DC converter belongs to the FPS? manufacturer family.A similar acdc converter can be searched by using the FSGM0765R family.There are 1 outputs to be run.The ac to dc conversions are contained in Switching Regulator or Controllers .The output current is set to 2.37A .Its output voltage amounts to 650V .The AC to DC inverter can be used with an input voltage of less than 26V V.There is a maximum current limAC to DC converter of 2mA for the supply.It can be determined that this power AC DC has a resistance of 1.6Ohm .The AC to DC power converter can be used with the max output power of 70W .
FSGM0765RWDTU Features
Packaged with TO-220-6 Full Pack, Formed Leads
Switching Frequency at 66kHz
With 6 pins
Output Current at 2.37A
Resistance : 1.6Ohm
FSGM0765RWDTU Applications
There are a lot of ON Semiconductor FSGM0765RWDTU AC DC Converters applications.
- Charger
- Adapter/Charger for Cell
- Tablets
- Standby power supplies for IR
- MP3
- Adaptors for Portable Media Player
- Adapters for Handheld Electronics
- Battery chargers for cordless
- Universal Off-Line Power Supplies
- Set -Top Box (STB) Power Supply
