Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 23 hours ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Number of Pins |
8 |
Weight |
851mg |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tube |
Published |
2015 |
Series |
FPS™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
1.8Ohm |
Terminal Finish |
Tin (Sn) |
Power (Watts) |
40W |
Subcategory |
Switching Regulator or Controllers |
Max Power Dissipation |
1.5W |
Terminal Position |
DUAL |
Number of Functions |
1 |
Base Part Number |
FSGM300 |
Number of Outputs |
2 |
Operating Supply Voltage |
22.5V |
Input Voltage-Nom |
14V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Operating Supply Current |
1.5mA |
Nominal Supply Current |
1.5mA |
Power Dissipation |
1.5W |
Output Current |
1.6A |
Voltage - Supply (Vcc/Vdd) |
7.7V~26V |
Max Supply Current |
2mA |
Topology |
Flyback |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
67kHz |
Control Technique |
PULSE WIDTH MODULATION |
Rise Time |
26ns |
Fall Time (Typ) |
25 ns |
Nominal Input Voltage |
26V |
Switcher Configuration |
SINGLE |
Max Output Power |
30W |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
Max Duty Cycle |
83 % |
Duty Cycle |
77% |
Output Isolation |
Isolated |
Voltage - Start Up |
12V |
Min Breakdown Voltage |
650V |
Length |
9.415mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
FSGM300N Overview
The ac to dc converter is embedded in 8-DIP (0.300, 7.62mm) package.The ac dc converter is available in Tube case.It is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~125°C TJ °C in order to achieve its full performance.The AC DC converter uses a type SWITCHING CONTROLLER analog integrated circuit.As a result, the switching frequency reaches 67kHz .Vcc/Vdd can be used within the range of 7.7V~26V supply voltage.Total terminations are 8 .It contains 8 pins.The ac dc converters is suitable for mounting by Through Hole .It belongs to the family of FPS? manufacturers.A similar acdc converter can be searched by using the FSGM300 family.There are 2 outputs to run.AC to DC converter is contained in Switching Regulator or Controllers .AC to DC converter is set to 1.6A for the output current.You may read the REACH SVHC standard at No SVHC .As soon as the supply voltage drops to 22.5V , the interface IC conducts.A maximum supply current of 2mA can be handled by this power AC DC.A measurement of the resistance of this power AC DC indicates that it is 1.8Ohm .A maximum output power of 30W can be used with the AC to DC power converter.
FSGM300N Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 67kHz
With 8 pins
Output Current at 1.6A
Operating Supply Voltage at the range of 22.5V
Resistance : 1.8Ohm
FSGM300N Applications
There are a lot of ON Semiconductor FSGM300N AC DC Converters applications.
- Standby power
- Auxiliary Power Supplies
- AC--DC Adapter
- Portable Apparatus
- Cellular phone chargers
- Appliances
- Power Adaptors
- Home appliances
- Standby power supplies for VCR
- Records