banner_page

FSL106HR

8 Terminations8V~26V 8 Pin FSL106 AC to DC power converterFPS? Series 1 Outputs100kHz


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-FSL106HR
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 385
  • Description: 8 Terminations8V~26V 8 Pin FSL106 AC to DC power converterFPS? Series 1 Outputs100kHz (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Weight 930mg
Operating Temperature -40°C~105°C TA
Packaging Tube
Published 2016
Series FPS™
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 11.5Ohm
Terminal Finish Tin (Sn)
Subcategory Switching Regulator or Controllers
Power Rating 13W
Max Power Dissipation 1.5W
Terminal Position DUAL
Number of Functions 1
Terminal Pitch 2.54mm
Base Part Number FSL106
Number of Outputs 1
Operating Supply Voltage 26V
Input Voltage-Nom 15V
Voltage 26V
Analog IC - Other Type SWITCHING CONTROLLER
Nominal Supply Current 2.5mA
Current 840mA
Power Dissipation 1.5W
Output Current 620mA
Voltage - Supply (Vcc/Vdd) 8V~26V
Max Supply Current 3.5mA
Topology Flyback
Control Mode CURRENT-MODE
Frequency - Switching 100kHz
Control Technique PULSE WIDTH MODULATION
Nominal Input Voltage 26V
Switcher Configuration SINGLE
Max Output Power 10W
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit
Max Duty Cycle 83 %
Duty Cycle 77%
Output Isolation Isolated
Voltage - Start Up 12V
Min Breakdown Voltage 650V
Height 3.683mm
Length 9.83mm
Width 6.67mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

FSL106HR Overview


There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm) .There is a AC/DC power converter of Tube available.A AC/DC converter of this type is mounted in the way of Through Hole .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~105°C TA .Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.When the switching frequency reaches 100kHz , the process is complete.It can be used within the range of 8V~26V supply voltage (Vcc/Vdd).There are a total of 8 terminations.There are 8 pins on the ac/dc converter.Through Hole is the recommended mounting method for the ac dc converters.The product is acdc converter of the FPS? manufacturer family.The FSL106 family allows you to search for similar acdc converters.A total of 1 outputs need to be run.There are a ac to dc conversions included in Switching Regulator or Controllers .AC to DC converter is set to 620mA for the output current.You can read the standard of REACH SVHC : No SVHC .During a 26V -voltage supply, the interface IC conducts.There is a maximum supply current of 3.5mA that AC to DC converter can handle.The power AC DC's resistance can be determined to be 11.5Ohm .A maximum output power of 10W can be used with the AC to DC power converter.

FSL106HR Features


Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 100kHz
With 8 pins
Output Current at 620mA
Operating Supply Voltage at the range of 26V
Resistance : 11.5Ohm

FSL106HR Applications


There are a lot of ON Semiconductor FSL106HR AC DC Converters applications.

  • Records
  • SMPS house keeping power supplies
  • DVD players
  • AC/DC Adaptors/Chargers for Cordless Phone
  • Power adapters for monitors
  • Automotive Clusters
  • Laptops and personal digital assistants
  • AC/DC LED Driver applications
  • Switching AC-DC Charger
  • LED lights

Write a review

Note: HTML is not translated!
    Bad           Good