FSL106MR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 930mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tube |
| Published | 2016 |
| Series | FPS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 11.5Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 10W |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | FSL106 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 26V |
| Input Voltage-Nom | 14V |
| Voltage | 26V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 2.5mA |
| Current | 620mA |
| Power Dissipation | 1.5W |
| Output Current | 480mA |
| Voltage - Supply (Vcc/Vdd) | 8V~26V |
| Max Supply Current | 3.5mA |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 67kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 26V |
| Switcher Configuration | SINGLE |
| Max Output Power | 8W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 83 % |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12V |
| Min Breakdown Voltage | 650V |
| Height | 3.683mm |
| Length | 9.83mm |
| Width | 6.67mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FSL106MR Overview
An embedded ac to dc converter is included in 8-DIP (0.300, 7.62mm) package.In Tube case, the ac dc converter is available.The AC/DC converter is mounted in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~105°C TA °C.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.In this AC to DC transformer, the switching frequency is 67kHz .A range of 8V~26V supply voltages (Vcc/Vdd) can be used.As a result, it has had 8 terminations.Approximately 8 pins are present on the ac/dc converter.Through Hole is the recommended mounting method for the ac dc converters.It is a member of FPS? manufacturer family.Based on the FSL106 family, you can search for similar acdc converters.AC to DC converter is necessary to run 1 outputs.Switching Regulator or Controllers contains the ac to dc conversions.We are setting the output current to 480mA .Here is the standard for REACH SVHC : No SVHC .It is possible for the interface IC to conduct when the supply voltage is 26V .There is a maximum current limAC to DC converter of 3.5mA for the supply.The resistance of this power AC DC can be determined to be 11.5Ohm .With a maximum output power of 8W , the AC to DC power converter can be used.
FSL106MR Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 67kHz
With 8 pins
Output Current at 480mA
Operating Supply Voltage at the range of 26V
Resistance : 11.5Ohm
FSL106MR Applications
There are a lot of ON Semiconductor FSL106MR AC DC Converters applications.
- Adapter for ADSL
- Battery Chargers
- Automotive Clusters
- Handheld/Battery-Powered Systems
- Small off-line low voltage power supplies
- Adapters for Handheld Electronics
- Standby Power Supplies
- Switching AC-DC Adapter
- Universal Off-Line Power Supplies
- PDAs
