Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Number of Pins |
8 |
Weight |
930mg |
Operating Temperature |
-40°C~105°C TA |
Packaging |
Tube |
Published |
2016 |
Series |
FPS™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin (Sn) |
Subcategory |
Switching Regulator or Controllers |
Power Rating |
14W |
Max Power Dissipation |
16W |
Terminal Position |
DUAL |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Base Part Number |
FSL116 |
Number of Outputs |
1 |
Input Voltage-Nom |
14V |
Voltage |
265V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Nominal Supply Current |
2.5mA |
Current |
1A |
Power Dissipation |
1.5W |
Output Current |
1A |
Voltage - Supply (Vcc/Vdd) |
8V~26V |
Max Supply Current |
3.5mA |
Topology |
Flyback |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
100kHz |
Control Technique |
PULSE WIDTH MODULATION |
Switcher Configuration |
SINGLE |
Max Output Power |
14W |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
Max Duty Cycle |
83 % |
Duty Cycle |
77% |
Output Isolation |
Isolated |
Voltage - Start Up |
12V |
Min Breakdown Voltage |
650V |
Height |
3.68mm |
Length |
9.83mm |
Width |
6.67mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
FSL116HR Overview
It is embedded in package 8-DIP (0.300, 7.62mm) .In Tube AC/DC power converter, it is available.Through Hole is mounted in the way of this AC/DC converter.Ideally, the ac dc converter should be operated at a temperature of -40°C~105°C TA degrees Celsius.This AC DC converter employs SWITCHING CONTROLLER analog IC type.There is 100kHz switching frequency.This AC/DC converter is designed for use within the range of 8V~26V supply voltage (Vcc/Vdd).It has a total of 8 terminations.In this ac/dc converter, there are 8 pins.The ac dc converters is suitable for mounting by Through Hole .It belongs to the manufacturer family of FPS? .The FSL116 family allows you to search for similar acdc converters.There are 1 outputs to run.Switching Regulator or Controllers contains the ac to dc conversions.Currently, the output current is set to 1A .AC to DC converter is capable of handling a maximum supply current of 3.5mA A.With a maximum output power of 14W , the AC to DC power converter can be used.
FSL116HR Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 100kHz
With 8 pins
Output Current at 1A
FSL116HR Applications
There are a lot of ON Semiconductor FSL116HR AC DC Converters applications.
- Air Conditioning
- Open Frame Switching Power Supply
- Laptops
- Charger
- Cellular phone chargers
- IoT Applications
- Standby Power for General Off-Line Applications
- Networking
- USB-PD 2.0
- AC/DC Adaptors/Chargers for Cell Phones