FSL117MRIN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 815.6mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2016 |
| Series | FPS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 11Ohm |
| Terminal Finish | Tin (Sn) |
| Power (Watts) | 15W |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 10W |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FSL117 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 1.2mA |
| Current | 800mA |
| Power Dissipation | 1.5W |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.5V~26V |
| Max Supply Current | 500μA |
| Turn On Delay Time | 12 ns |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 67kHz |
| Turn-Off Delay Time | 30 ns |
| Max Output Power | 10W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 73 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12V |
| Min Breakdown Voltage | 700V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.67mm |
| RoHS Status | ROHS3 Compliant |
FSL117MRIN Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm) .The ac dc converter is available in Tube case.It is mounted in the way of Through Hole .The ac dc converter needs to be operated at -40°C~125°C TJ °C in order to perform.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.In this AC to DC transformer, the switching frequency is 67kHz .It can be used within the range of 7.5V~26V supply voltage (Vcc/Vdd).A total of 8 terminations have been recorded.There are 8 pins on the ac/dc converter.Through Hole is the recommended mounting method for the ac dc converters.A member of the FPS? manufacturer family, it has the following characteristics.Similar acdc converters can be found using the FSL117 family.There are 1 outputs to run.The following ac to dc conversions are contained in Switching Regulator or Controllers .1A is set as the output current.The maximum supply current AC to DC converter can handle is 500μA .It is possible to determine the resistance of this power AC DC to be 11Ohm .The AC to DC power converter can be used with the max output power of 10W .
FSL117MRIN Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 67kHz
With 8 pins
Output Current at 1A
Resistance : 11Ohm
FSL117MRIN Applications
There are a lot of ON Semiconductor FSL117MRIN AC DC Converters applications.
- ZigBee
- Air conditioners
- Battery chargers for mobile devices with touchpad display
- Open Frame Switching Power Supply
- Wireless System
- RCC SMPS
- Automotive Telematics
- Low power ac?dc Adapters for Chargers
- Rice Cooker
- Lighting controls
