FSL126MR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 930mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tube |
| Published | 2016 |
| Series | FPS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 4.9Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 21W |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | FSL126 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 14V |
| Voltage | 26V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2.5mA |
| Nominal Supply Current | 2.5mA |
| Current | 1.68A |
| Power Dissipation | 1.5W |
| Output Current | 1.32A |
| Voltage - Supply (Vcc/Vdd) | 8V~26V |
| Max Supply Current | 3.5mA |
| Output Power | 21W |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 67kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 26V |
| Switcher Configuration | SINGLE |
| Max Output Power | 17W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 83 % |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12V |
| Min Breakdown Voltage | 650V |
| Height | 3.683mm |
| Length | 9.83mm |
| Width | 6.67mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FSL126MR Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm) .Tube case is available for the ac dc converter.A AC/DC converter of this type is mounted in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of -40°C~105°C TA degrees Celsius.In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .As soon as the switching frequency reaches 67kHz , the circuit is closed.This AC/DC converter is suitable for operation in the range of 8V~26V supply voltage (Vcc/Vdd).There are a total of 8 terminations.A ac/dc converter with 8 pins is available.Through Hole is a suitable mounting point for the ac dc converters.The AC to DC converter belongs to the manufacturer family of FPS? .The FSL126 family allows you to search for similar acdc converters.There are 1 outputs to be processed.The ac to dc conversions are contained in Switching Regulator or Controllers .There is 1.32A output current set.You are able to read the REACH SVHC standard at: No SVHC .The output power of a coverter generates 21W .The maximum supply current is 3.5mA .It can be determined that the resistance of this power AC DC is 4.9Ohm .Using the AC to DC power converter with the maximum output power of 17W is possible.
FSL126MR Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 67kHz
With 8 pins
Output Current at 1.32A
Resistance : 4.9Ohm
FSL126MR Applications
There are a lot of ON Semiconductor FSL126MR AC DC Converters applications.
- Portable audio
- ZigBee
- Wall switches
- Replacements for bulky plug-in transformers
- Automotive Telematics
- LED lights
- Automotive Clusters
- AC/DC Adaptors/Chargers for E-books
- Power Adaptors
- SMPS house keeping power supplies
