FSL128MRTWDTU
| Parameters | |
|---|---|
| Published | 2016 |
| Series | FPS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Power (Watts) | 40W |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 30W |
| Max Power Dissipation | 47W |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Base Part Number | FSL128 |
| Number of Outputs | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 1mA |
| Current | 1.2A |
| Power Dissipation | 47W |
| Output Current | 1.2A |
| Voltage - Supply (Vcc/Vdd) | 7.5V~26V |
| Max Supply Current | 1.4mA |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 67kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Max Output Power | 25W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 73 % |
| Max Junction Temperature (Tj) | 125°C |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12V |
| Min Breakdown Voltage | 800V |
| Height | 20mm |
| Length | 10.16mm |
| Width | 4.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-6 Full Pack, Formed Leads |
| Number of Pins | 6 |
| Weight | 2.752g |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
FSL128MRTWDTU Overview
In the package TO-220-6 Full Pack, Formed Leads , the ac to dc converter is embedded.There is a AC/DC power converter of Tube available.Through Hole mounts this AC/DC converter.This ac dc converter should be operated at a temperature of -40°C~125°C TJ °C so that it can deliver its performance.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.As a result, the switching frequency reaches 67kHz .A range of 7.5V~26V supply voltages (Vcc/Vdd) can be used.A total of 6 terminations have been recorded.Approximately 6 pins are present on the ac/dc converter.It are possible to mount thare ac dc converters by Through Hole .It belongs to the family of FPS? manufacturers.It is possible to search for similar acdc converters by using the FSL128 family.In this AC to DC transformer, there are 1 outputs to run.The ac to dc conversions are included in Switching Regulator or Controllers .Currently, the output current is set to 1.2A .Supply currents up to 1.4mA can be handled by this power AC DC.It is possible to use the AC to DC power converter with a maximum output power of 25W .
FSL128MRTWDTU Features
Packaged with TO-220-6 Full Pack, Formed Leads
Switching Frequency at 67kHz
With 6 pins
Output Current at 1.2A
FSL128MRTWDTU Applications
There are a lot of ON Semiconductor FSL128MRTWDTU AC DC Converters applications.
- Humidifier
- Records
- Power Adaptors
- Utility meters
- Smartphones
- Portable audio
- Consumer electronics
- Auxiliary Power Supply
- SMPS house keeping power supplies
- Portable Apparatus
