banner_page

FSL136HR

8 Terminations8V~26V 8 Pin FSL136 AC to DC power converterFPS? Series 1 Outputs100kHz


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-FSL136HR
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 568
  • Description: 8 Terminations8V~26V 8 Pin FSL136 AC to DC power converterFPS? Series 1 Outputs100kHz (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Weight 930mg
Operating Temperature -40°C~105°C TA
Packaging Tube
Published 2013
Series FPS™
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 4Ohm
Power (Watts) 26W
Subcategory Switching Regulator or Controllers
Power Rating 1.5W
Max Power Dissipation 1.5W
Terminal Position DUAL
Number of Functions 1
Terminal Pitch 2.54mm
Base Part Number FSL136
Number of Outputs 1
Input Voltage-Nom 230V
Voltage 26V
Analog IC - Other Type SWITCHING CONTROLLER
Nominal Supply Current 2.5mA
Current 3.5mA
Power Dissipation 1.5W
Output Current 3A
Voltage - Supply (Vcc/Vdd) 8V~26V
Max Supply Current 3.5mA
Turn On Delay Time 12 ns
Topology Flyback
Control Mode CURRENT-MODE
Frequency - Switching 100kHz
Max Input Voltage 26V
Control Technique PULSE WIDTH MODULATION
Turn-Off Delay Time 20 ns
Switcher Configuration SINGLE
Max Output Power 20W
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit
Max Duty Cycle 83 %
Duty Cycle 77%
Output Isolation Isolated
Voltage - Start Up 12V
Min Breakdown Voltage 650V
Height 3.683mm
Length 9.83mm
Width 6.67mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

FSL136HR Overview


An embedded ac to dc converter is included in 8-DIP (0.300, 7.62mm) package.Tube case is available for the ac dc converter.The AC/DC converter is mounted in the way of Through Hole .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~105°C TA .An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.As a result, the switching frequency reaches 100kHz .Vcc/Vdd can be used within the range of 8V~26V supply voltage.There are a total of 8 terminations.On the ac/dc converter, there are 8 pins.The ac dc converters are suitable to mount by Through Hole .This AC to DC converter belongs to the FPS? manufacturer family.If you select the FSL136 family, you will be able to search similar acdc converters.There are 1 outputs to be run.The ac to dc conversions are included in Switching Regulator or Controllers .Current output is set to 3A .An input voltage of 26V is available for powering the AC to DC converter.The maximum supply current AC to DC converter can handle is 3.5mA .It is possible to determine the resistance of this power AC DC to be 4Ohm .Using the AC to DC power converter with 20W maximum output power is possible.

FSL136HR Features


Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 100kHz
With 8 pins
Output Current at 3A
Resistance : 4Ohm

FSL136HR Applications


There are a lot of ON Semiconductor FSL136HR AC DC Converters applications.

  • Power adapters for network devices
  • Adapter for ADSL
  • Standby and Auxiliary Power Supplies
  • Adapters
  • Charger
  • AC?DC USB chargers for Cell Phones
  • Smartphones
  • Auxiliary Power Supply
  • Set -Top Box (STB) Power Supply
  • Standby power supplies for VCR

Write a review

Note: HTML is not translated!
    Bad           Good