FSL136HRLX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD, Gull Wing |
| Number of Pins | 8 |
| Weight | 710mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | FPS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 3.5Ohm |
| Terminal Finish | Tin (Sn) |
| Power (Watts) | 26W |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 19W |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Base Part Number | FSL136 |
| Number of Outputs | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 2.5mA |
| Current | 1.8A |
| Power Dissipation | 1.5W |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 8V~26V |
| Max Supply Current | 3.5mA |
| Turn On Delay Time | 12 ns |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Turn-Off Delay Time | 20 ns |
| Max Output Power | 20W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 83 % |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12V |
| Min Breakdown Voltage | 650V |
| Height | 3.6mm |
| Length | 9.4mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
FSL136HRLX Overview
An embedded ac to dc converter is included in 8-SMD, Gull Wing package.There is a AC/DC power converter of Tape & Reel (TR) available.Surface Mount is mounted in the way of this AC/DC converter.This ac dc converter should be operated at a temperature of -40°C~105°C TA °C so that it can deliver its performance.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.In this AC to DC transformer, the switching frequency is 100kHz .Vcc/Vdd can be used within the range of 8V~26V supply voltage.In total, there are 8 terminations.In this ac/dc converter, there are 8 pins.There are no problem mounting the ac dc converters by Surface Mount .This AC to DC converter belongs to the FPS? manufacturer family.If you select the FSL136 family, you will be able to search similar acdc converters.A total of 1 outputs need to be run.There are a ac to dc conversions included in Switching Regulator or Controllers .Current output is set to 3A .The maximum supply current is 3.5mA .It can be determined that this power AC DC has a resistance of 3.5Ohm .A maximum output power of 20W can be used with the AC to DC power converter.
FSL136HRLX Features
Packaged with 8-SMD, Gull Wing
Switching Frequency at 100kHz
With 8 pins
Output Current at 3A
Resistance : 3.5Ohm
FSL136HRLX Applications
There are a lot of ON Semiconductor FSL136HRLX AC DC Converters applications.
- Portable Apparatus
- Standby power supplies for IR
- RCC SMPS
- Appliance Power Supplies
- Automotive Infotainment
- Home Appliance Applications
- Industrial controls
- Battery Chargers
- Switching AC-DC Charger
- Chargers for cell/cordless phones
