FSL136MR
| Parameters | |
|---|---|
| Base Part Number | FSL136 |
| Output Voltage | 650V |
| Operating Supply Voltage | 26V |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Voltage | 26V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Current | 2.41A |
| Output Current | 2.15A |
| Voltage - Supply (Vcc/Vdd) | 8V~26V |
| Max Supply Current | 3.5mA |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 67kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 26V |
| Switcher Configuration | SINGLE |
| Max Output Power | 20W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 83 % |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12V |
| Min Breakdown Voltage | 650V |
| Height | 3.683mm |
| Length | 9.83mm |
| Width | 6.67mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 930mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tube |
| Published | 2013 |
| Series | FPS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 3.5Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 26W |
| Max Power Dissipation | 26W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
FSL136MR Overview
An embedded ac to dc converter is included in 8-DIP (0.300, 7.62mm) package.You can get it in AC/DC power converter Tube .This AC/DC converter is mounted in the way of Through Hole .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~105°C TA .Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.67kHz is the switching frequency.Within the range of 8V~26V supply voltage (Vcc/Vdd), it can be used.As a result, it has a total of 8 terminations.On the ac/dc converter, there are 8 pins.Through Hole are the recommended mounting method for the ac dc converters.The AC to DC converter belongs to the manufacturer family of FPS? .Based on the FSL136 family, you can search for similar acdc converters.AC to DC converter is contained in Switching Regulator or Controllers .There is 2.15A output current set.Its output voltage is650V .In the following link, you will find the REACH SVHC standard: No SVHC .At 26V supply voltage, the interface IC conducts.AC to DC converter can handle a maximum supply current of 3.5mA .In total, there are 1 channels.The resistance of this power AC DC is 3.5Ohm .With 20W as the maximum output power, the AC to DC power converter can be used.
FSL136MR Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 67kHz
With 8 pins
Output Current at 2.15A
Operating Supply Voltage at the range of 26V
With 1 channels on it
Resistance : 3.5Ohm
FSL136MR Applications
There are a lot of ON Semiconductor FSL136MR AC DC Converters applications.
- Laptops
- Shaver Charger
- ZigBee
- Vacuum Cleaner
- Air conditioners
- AC/DC Adaptors/Chargers for PDAs
- Standby Power Supplies
- 3.3V power supplies
- Set -Top Box (STB) Power Supply
- MPS parts
