Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
TO-220-6 Full Pack, Formed Leads |
Number of Pins |
6 |
Weight |
2.752g |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tube |
Published |
2016 |
Series |
FPS™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
4Ohm |
Terminal Finish |
Tin (Sn) |
Subcategory |
Switching Regulator or Controllers |
Power Rating |
35W |
Max Power Dissipation |
50W |
Terminal Position |
ZIG-ZAG |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
FSL136 |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Voltage |
265V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Nominal Supply Current |
400μA |
Current |
3A |
Power Dissipation |
50W |
Output Current |
1.89A |
Voltage - Supply (Vcc/Vdd) |
7.5V~26V |
Max Supply Current |
500μA |
Turn On Delay Time |
12 ns |
Topology |
Flyback |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
67kHz |
Turn-Off Delay Time |
20 ns |
Max Output Power |
35W |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Load, Over Temperature, Over Voltage |
Max Duty Cycle |
73 % |
Duty Cycle |
67% |
Output Isolation |
Isolated |
Voltage - Start Up |
12V |
Min Breakdown Voltage |
650V |
Height |
16.07mm |
Length |
10.16mm |
Width |
4.8mm |
RoHS Status |
ROHS3 Compliant |
FSL136MRTWDTU Overview
In the TO-220-6 Full Pack, Formed Leads package, the ac to dc converter is embedded.Tube case is available for the ac dc converter.This AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~125°C TJ °C in order to achieve its full performance.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.As soon as the switching frequency reaches 67kHz , the circuit is closed.It can be used within the range of 7.5V~26V supply voltage (Vcc/Vdd).As a result, it has had 6 terminations.There are 6 pins on the ac/dc converter.It is suitable for mounting by Through Hole .It belongs to the manufacturer family of FPS? .Search similar acdc converters based on FSL136 family members.In this AC to DC transformer, there are 1 outputs to run.The following ac to dc conversions are contained in Switching Regulator or Controllers .AC to DC converter is set to 1.89A for the output current.The maximum supply current is 500μA .It is possible to determine the resistance of this power AC DC to be 4Ohm .With 35W as the maximum output power, the AC to DC power converter can be used.
FSL136MRTWDTU Features
Packaged with TO-220-6 Full Pack, Formed Leads
Switching Frequency at 67kHz
With 6 pins
Output Current at 1.89A
Resistance : 4Ohm
FSL136MRTWDTU Applications
There are a lot of ON Semiconductor FSL136MRTWDTU AC DC Converters applications.
- Standby Power Supply
- RCC SMPS
- Set-top boxes
- Utility meters
- Dimmers
- Appliance Power Supplies
- Universal input AC/DC adapters (15W - 45W)
- Battery chargers for media tablets
- AC/DC Adaptors/Chargers for Cell Phones
- Lighting controls