banner_page

FSL156MRBN

8 Terminations7.5V~26V 8 Pin FSL156 AC to DC power converterFPS? Series 1 Outputs67kHz


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-FSL156MRBN
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 447
  • Description: 8 Terminations7.5V~26V 8 Pin FSL156 AC to DC power converterFPS? Series 1 Outputs67kHz (Kg)

Details

Tags

Parameters
Number of Terminations 8
ECCN Code EAR99
Resistance 2.2Ohm
Power (Watts) 40W
Subcategory Switching Regulator or Controllers
Power Rating 26W
Max Power Dissipation 1.5W
Terminal Position DUAL
Peak Reflow Temperature (Cel) NOT SPECIFIED
Terminal Pitch 2.54mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number FSL156
Number of Outputs 1
Qualification Status Not Qualified
Analog IC - Other Type SWITCHING CONTROLLER
Nominal Supply Current 400μA
Current 1.6A
Power Dissipation 1.5W
Voltage - Supply (Vcc/Vdd) 7.5V~26V
Max Supply Current 500μA
Turn On Delay Time 14 ns
Topology Flyback
Control Mode CURRENT-MODE
Frequency - Switching 67kHz
Turn-Off Delay Time 32 ns
Max Output Power 30W
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit
Max Duty Cycle 73 %
Duty Cycle 67%
Output Isolation Isolated
Voltage - Start Up 12V
Min Breakdown Voltage 650V
Height 3.68mm
Length 9.83mm
Width 6.67mm
RoHS Status ROHS3 Compliant
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Weight 815.6mg
Operating Temperature -40°C~125°C TJ
Packaging Tube
Published 2013
Series FPS™
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)

FSL156MRBN Overview


This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm) .The AC/DC power converter is available in Tube .There is a mounting point for this AC/DC converter in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~125°C TJ °C in order to achieve its full performance.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.When the switching frequency reaches 67kHz , the circuit is closed.It can be used within the range of 7.5V~26V supply voltage (Vcc/Vdd).There are a total of 8 terminations.On the ac/dc converter, there are 8 pins.Through Hole is a suitable mounting point for the ac dc converters.It belongs to the family of FPS? manufacturers.Similar acdc converters can be found using the FSL156 family.A total of 1 outputs are to be processed.There are a ac to dc conversions included in Switching Regulator or Controllers .AC to DC converter can handle a maximum supply current of 500μA .This power AC DC's resistance can be determined to be 2.2Ohm .The AC to DC power converter is capable of operating at a maximum output power of 30W .

FSL156MRBN Features


Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 67kHz
With 8 pins
Resistance : 2.2Ohm

FSL156MRBN Applications


There are a lot of ON Semiconductor FSL156MRBN AC DC Converters applications.

  • Standby Power Supply
  • Adapter/Charger for Cell
  • Adaptors for DSCs
  • Standby power
  • Replaces linear transformers
  • Standby power supplies for VCR
  • AC--DC Adapter
  • Smartphones
  • Standby power supplies for IR
  • PDAs

Write a review

Note: HTML is not translated!
    Bad           Good