Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
LAST SHIPMENTS (Last Updated: 1 day ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SMD, Gull Wing |
Number of Pins |
8 |
Weight |
710mg |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2016 |
Series |
FPS™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
19Ohm |
Terminal Finish |
Tin (Sn) |
Power (Watts) |
12W |
Subcategory |
Switching Regulator or Controllers |
Power Rating |
7W |
Max Power Dissipation |
1.3W |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
250 |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Base Part Number |
FSL206 |
Number of Outputs |
1 |
Output Voltage |
650V |
Input Voltage-Nom |
10V |
Voltage |
26V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Nominal Supply Current |
300μA |
Current |
660mA |
Power Dissipation |
1.3W |
Voltage - Supply (Vcc/Vdd) |
7V~26V |
Max Supply Current |
1.3mA |
Turn On Delay Time |
6.1 ns |
Topology |
Flyback |
Min Input Voltage |
26V |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
67kHz |
Max Input Voltage |
265V |
Control Technique |
PULSE WIDTH MODULATION |
Nominal Input Voltage |
26V |
Turn-Off Delay Time |
43.6 ns |
Switcher Configuration |
SINGLE |
Max Output Power |
7W |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Load, Over Temperature, Over Voltage |
Max Duty Cycle |
78 % |
Duty Cycle |
72% |
Output Isolation |
Isolated |
Voltage - Start Up |
8V |
Min Input Voltage (AC) |
85V |
Max Input Voltage (AC) |
265V |
Min Breakdown Voltage |
650V |
Height |
3.6mm |
Length |
9.4mm |
Width |
6.6mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
FSL206MRL Overview
An embedded ac to dc converter is included in 8-SMD, Gull Wing package.In Tube AC/DC power converter, it is available.A AC/DC converter of this type is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.The switching frequency reaches 67kHz .This AC/DC converter is designed for use within the range of 7V~26V supply voltage (Vcc/Vdd).As a result, it has had 8 terminations.On the ac/dc converter, there are 8 pins.Surface Mount are the recommended mounting method for the ac dc converters.This AC to DC converter belongs to the FPS? family of manufacturers.It is possible to search for similar acdc converters by using the FSL206 family.In this AC to DC transformer, there are 1 outputs to run.The ac to dc conversions are contained in Switching Regulator or Controllers .As a result, its output voltage is 650V .It is possible to read the REACH SVHC standard at: No SVHC .Under 265V , it is possible to power the AC to DC converter's input voltage.If the input voltage is less than 26V V, the AC to DC inverter can be used.AC to DC converter can handle a maximum supply current of 1.3mA .The AC to DC power converter's input voltage (AC) should be below 265V .The power AC DC's resistance can be determined to be 19Ohm .AC to DC power converters with a max output power of 7W may be used.
FSL206MRL Features
Packaged with 8-SMD, Gull Wing
Switching Frequency at 67kHz
With 8 pins
Resistance : 19Ohm
FSL206MRL Applications
There are a lot of ON Semiconductor FSL206MRL AC DC Converters applications.
- Power Adaptors
- Battery chargers for media tablets
- Chargers for cell/cordless phones
- Appliance Power Supplies
- Power tools
- AC/DC Adaptors/Chargers for Cordless Phone
- Automotive Telematics
- Universal Off-Line Power Supplies
- 3.3V power supplies
- Power tools fast chargers with trickle and on/off