FSL306LRLX
| Parameters | |
|---|---|
| Rise Time | 7.6ns |
| Fall Time (Typ) | 26.1 ns |
| Switcher Configuration | BUCK-BOOST |
| Max Output Power | 7W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 77 % |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 8V |
| Min Breakdown Voltage | 650V |
| Height | 3.6mm |
| Length | 9.4mm |
| Width | 6.6mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Number of Pins | 8 |
| Weight | 776.7mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 3W |
| Max Power Dissipation | 7W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G7 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 12V |
| Output Type | Adjustable |
| Operating Supply Voltage | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 250μA |
| Current | 450mA |
| Output Current | 150mA |
| Voltage - Supply (Vcc/Vdd) | 7V~26V |
| Max Supply Current | 350μA |
| Output Power | 7W |
| Topology | Buck, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz |
| Control Technique | PULSE WIDTH MODULATION |
FSL306LRLX Overview
A ac to dc converter of the package 8-SMD (7 Leads), Gull Wing contains the ac to dc converter.The ac dc converter is available in Tape & Reel (TR) case.In this case, the AC/DC converter is mounted in the way of Surface Mount .The ac dc converter needs to be operated at -40°C~125°C TJ °C in order to perform.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.When the switching frequency reaches 50kHz , the process is complete.This AC/DC converter is designed for use within the range of 7V~26V supply voltage (Vcc/Vdd).There have been 7 terminations of this program.There are 8 pins on the ac/dc converter.Surface Mount is a suitable mounting point for the ac dc converters.In this AC to DC transformer, there are 1 outputs to run.There are a ac to dc conversions included in Switching Regulator or Controllers .150mA is set as the output current.There is 12V output voltage from this AC/DC converter.7W is the output power of a coverter.The interface IC conducts when the supply voltage is 10V .AC to DC converter is capable of handling a maximum supply current of 350μA A.This output uses Adjustable .AC to DC power converters with a max output power of 7W may be used.
FSL306LRLX Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 50kHz
With 8 pins
Output Current at 150mA
Operating Supply Voltage at the range of 10V
Output Type : Adjustable
FSL306LRLX Applications
There are a lot of ON Semiconductor FSL306LRLX AC DC Converters applications.
- Smartphones
- Automotive Infotainment
- Auxiliary Power Supplies
- Home Appliance Applications
- PDAs
- Open Frame Switching Power Supply
- ZigBee
- Switching AC-DC Charger
- 3.3V power supplies
- Rice Cooker
