FSQ0165RL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD, Gull Wing |
| Number of Pins | 8 |
| Weight | 710mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | FPS™ |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| Resistance | 10Ohm |
| Power (Watts) | 15W |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 55.6kHz |
| Base Part Number | FSQ0165 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Max Output Current | 900mA |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 3mA |
| Power Dissipation | 1.5W |
| Output Current | 900mA |
| Voltage - Supply (Vcc/Vdd) | 8V~20V |
| Max Supply Current | 5mA |
| Control Features | Sync |
| Max Output Voltage | 700V |
| Topology | Flyback |
| Min Input Voltage | 0V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 55kHz~67kHz |
| Max Input Voltage | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Max Output Power | 13W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 67 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 12V |
| Min Breakdown Voltage | 650V |
| Height | 3.6mm |
| Length | 9.4mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
FSQ0165RL Overview
In the package 8-SMD, Gull Wing , the ac to dc converter is embedded.Tube case is available for the ac dc converter.This AC/DC converter is mounted in the way of Surface Mount .The ac dc converter needs to be operated at -40°C~85°C TA °C in order to perform.SWITCHING REGULATOR analog ICs are employed in this AC DC converter.As a result, the switching frequency reaches 55kHz~67kHz .A range of 8V~20V supply voltages (Vcc/Vdd) can be used.In total, it has 8 terminations.A ac/dc converter with 8 pins is available.The ac dc converters are suitable for mounting by Surface Mount .This AC to DC converter belongs to the FPS? manufacturer family.The FSQ0165 family can be used to search for similar acdc converters.AC to DC converter is necessary to run 1 outputs.900mA is set as the output current.The output voltage of the AC/DC converter is 700V .When operating at a frequency of 55.6kHz , AC to DC converter is capable of reaching high efficiency.This is the standard of REACH SVHC : No SVHC .It is available to power the AC to DC converter input voltage under 20V .The AC to DC inverter may be operated with an input voltage less than 0V volts.There is a maximum current limAC to DC converter of 5mA for the supply.The power AC DC's resistance can be determined to be 10Ohm .Using the AC to DC power converter with 13W maximum output power is possible.
FSQ0165RL Features
Packaged with 8-SMD, Gull Wing
Switching Frequency at 55kHz~67kHz
With 8 pins
Output Current at 900mA
Resistance : 10Ohm
FSQ0165RL Applications
There are a lot of ON Semiconductor FSQ0165RL AC DC Converters applications.
- Low power ac?dc Adapters for Chargers
- Power tools
- Adapters
- Records
- Automotive Telematics
- Remotely-controlled appliances
- Automotive Clusters
- Dimmers
- Low-Voltage I/O System Power
- Standby Power Supplies
