FSQ0165RN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 851mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2015 |
| Series | FPS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 15W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 55.6kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FSQ0165 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 700V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 3mA |
| Power Dissipation | 1.5W |
| Output Current | 800mA |
| Voltage - Supply (Vcc/Vdd) | 8V~20V |
| Max Supply Current | 5mA |
| Output Power | 15W |
| Control Features | Sync |
| Input Voltage (Min) | 9V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 55kHz~67kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Max Output Power | 13W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 67 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 12V |
| Min Breakdown Voltage | 650V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.67mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FSQ0165RN Overview
It is embedded in package 8-DIP (0.300, 7.62mm) .The ac dc converter is available in Tube case.It is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~85°C TA in order to ensure its performance.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.Switching frequency reaches 55kHz~67kHz Hz.It can be used within the range of 8V~20V supply voltage (Vcc/Vdd).It has a total of 8 terminations.There are 8 pins on this ac/dc converter.There are no problem mounting the ac dc converters by Through Hole .It belongs to the manufacturer family of FPS? .It is possible to search for similar acdc converters by using the FSQ0165 family.A total of 1 outputs need to be run.Switching Regulator or Controllers includes the ac to dc conversions.It has been set to 800mA for the output current.Its output voltage amounts to 700V .This power AC DC is capable of reaching high efficiencies when operating at a frequency of 55.6kHz .This is the standard of REACH SVHC : No SVHC .Coverters generate 15W as their output power.Approximately 5mA amps of supply current can be handled by the power AC DC.This power AC DC's resistance can be determined to be 10Ohm .A maximum output power of 13W can be used with the AC to DC power converter.
FSQ0165RN Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 55kHz~67kHz
With 8 pins
Output Current at 800mA
Resistance : 10Ohm
FSQ0165RN Applications
There are a lot of ON Semiconductor FSQ0165RN AC DC Converters applications.
- Auxiliary Power Supplies
- Lighting controls
- Home Appliance Applications
- ZigBee
- Power adapters for monitors
- IoT Applications
- Charger
- Adapters
- Dimmers
- USB-PD 2.0
