FSQ0365RL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD, Gull Wing |
| Number of Pins | 8 |
| Weight | 710mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | FPS™ |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 4.5Ohm |
| Power Rating | 25W |
| Max Power Dissipation | 25W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 55.6kHz |
| Base Part Number | FSQ0365 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 3mA |
| Power Dissipation | 1.5W |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 8V~20V |
| Max Supply Current | 5mA |
| Output Power | 25W |
| Control Features | Sync |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 55kHz~67kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Max Output Power | 19W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 67 % |
| Drain to Source Resistance | 3.5Ohm |
| Output Isolation | Isolated |
| Voltage - Start Up | 12V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Breakdown Voltage | 650V |
| Height Seated (Max) | 3.7mm |
| Length | 9.55mm |
| Width | 6.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
FSQ0365RL Overview
In the package 8-SMD, Gull Wing , the ac to dc converter is embedded.The ac dc converter is available in Tube case.There is a AC/DC converter mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~85°C TA in order to ensure its performance.This AC DC converter employs SWITCHING REGULATOR analog IC type.Switching frequency reaches 55kHz~67kHz Hz.This AC/DC converter is suitable for operation in the range of 8V~20V supply voltage (Vcc/Vdd).A total of 8 terminations have been recorded.There are 8 pins on this ac/dc converter.Surface Mount is the recommended mounting method for the ac dc converters.Currently, it is acdc converter of the manufacturer family of FPS? .Based on the FSQ0365 family, you can search for similar acdc converters.AC to DC converter is necessary to run 1 outputs.1.5A is set as the output current.This AC/DC converter produces a voltage of 700V as its output.The power AC DC is capable of high efficiency when operated at a frequency of 55.6kHz .You can read the standard for REACH SVHC at: No SVHC .It is available to power the AC to DC converter input voltage under 265V .Coverters generate 25W as their output power.An input voltage of less than 85V volts is acceptable for use with this AC to DC inverter.AC to DC converter is capable of handling a maximum supply current of 5mA A.An input voltage (AC) should be applied under 265V to the AC to DC power converter.A resistance of 4.5Ohm can be determined for this power AC DC.The AC to DC power converter is capable of operating at a maximum output power of 19W .
FSQ0365RL Features
Packaged with 8-SMD, Gull Wing
Switching Frequency at 55kHz~67kHz
With 8 pins
Output Current at 1.5A
Resistance : 4.5Ohm
FSQ0365RL Applications
There are a lot of ON Semiconductor FSQ0365RL AC DC Converters applications.
- Linear Adapter Replacements
- Replaces linear transformers
- Z-Wave
- Cellular phone chargers
- Air Conditioning
- Standby power supplies for TV
- Adapter/Charger for Cordless Phones
- Records
- White goods
- AC-DC Output Power Conversion Applications
