Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Number of Pins |
8 |
Weight |
851mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2006 |
Series |
FPS™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
4.5Ohm |
Terminal Finish |
Tin (Sn) |
Subcategory |
Switching Regulator or Controllers |
Max Power Dissipation |
25W |
Terminal Position |
DUAL |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Frequency |
55.6kHz |
Base Part Number |
FSQ0365 |
Number of Outputs |
1 |
Output Voltage |
700V |
Input Voltage-Nom |
15V |
Interface |
Parallel |
Analog IC - Other Type |
SWITCHING REGULATOR |
Nominal Supply Current |
3mA |
Power Dissipation |
1.5W |
Output Current |
1.32A |
Voltage - Supply (Vcc/Vdd) |
8V~20V |
Max Supply Current |
5mA |
Output Power |
25W |
Control Features |
Sync |
Input Voltage (Min) |
9V |
Topology |
Flyback |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
55kHz~67kHz |
Control Technique |
PULSE WIDTH MODULATION |
Switcher Configuration |
SINGLE |
Max Output Power |
19W |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Load, Over Temperature, Over Voltage |
Max Duty Cycle |
67 % |
Output Isolation |
Isolated |
Voltage - Start Up |
12V |
Min Breakdown Voltage |
650V |
Height |
3.68mm |
Length |
9.83mm |
Width |
6.67mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
FSQ0365RN Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm) .It is available in Tube AC/DC power converter.In this case, the AC/DC converter is mounted in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~85°C TA °C.This AC DC converter employs SWITCHING REGULATOR analog IC type.There is 55kHz~67kHz switching frequency.The AC/DC converter is capable of being used when the supply voltage is 8V~20V (Vcc/Vdd).A total of 8 terminations have been recorded.There are 8 pins on the ac/dc converter.The ac dc converters is suitable for mounting by Through Hole .It belongs to the manufacturer family of FPS? .It is possible to search for similar acdc converters by using the FSQ0365 family.A total of 1 outputs need to be run.AC to DC converter is included in Switching Regulator or Controllers .1.32A is set as the output current.This AC/DC converter produces a voltage of 700V as its output.As long as AC to DC converter is operated at frequency 55.6kHz ,it is capable of attaining high efficiency.You are able to read the REACH SVHC standard at: No SVHC .Coverters generate 25W as their output power.Approximately 5mA amps of supply current can be handled by the power AC DC.The resistance of this power AC DC is 4.5Ohm .The AC to DC power converter can be used with the max output power of 19W .
FSQ0365RN Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 55kHz~67kHz
With 8 pins
Output Current at 1.32A
Resistance : 4.5Ohm
FSQ0365RN Applications
There are a lot of ON Semiconductor FSQ0365RN AC DC Converters applications.
- SMPS house keeping power supplies
- Automotive Telematics
- AC--DC Adapter
- Tablets
- DVD players
- Shaver Charger
- Set Top Boxes (STB)
- Rice Cooker
- AC/DC Adaptors/Chargers for PDAs
- Adaptors for DSCs