Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Number of Pins |
8 |
Weight |
851mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2006 |
Series |
FPS™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
4Ohm |
Terminal Finish |
Tin (Sn) |
Subcategory |
Switching Regulator or Controllers |
Power Rating |
27W |
Max Power Dissipation |
1.5W |
Terminal Position |
DUAL |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Frequency |
100kHz |
Base Part Number |
FSQ0370 |
Number of Outputs |
1 |
Input Voltage-Nom |
14V |
Voltage |
20V |
Interface |
Parallel |
Analog IC - Other Type |
SWITCHING REGULATOR |
Nominal Supply Current |
3mA |
Current |
3A |
Power Dissipation |
1.5W |
Output Current |
1.1A |
Voltage - Supply (Vcc/Vdd) |
8V~20V |
Max Supply Current |
5mA |
Topology |
Flyback |
Min Input Voltage |
85V |
Control Mode |
CURRENT-MODE |
Max Input Voltage |
265V |
Control Technique |
PULSE WIDTH MODULATION |
Switcher Configuration |
SINGLE |
Max Output Power |
19W |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Load, Over Temperature, Over Voltage |
Max Duty Cycle |
65 % |
Duty Cycle |
60% |
Output Isolation |
Isolated |
Voltage - Start Up |
12V |
Min Input Voltage (AC) |
85V |
Max Input Voltage (AC) |
265V |
Min Breakdown Voltage |
700V |
Height |
3.4mm |
Length |
9.2mm |
Width |
6.4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
FSQ0370RNA Overview
It is embedded in package 8-DIP (0.300, 7.62mm) .In Tube case, the ac dc converter is available.A AC/DC converter of this type is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of -40°C~85°C TA °C so that it can deliver its performance.The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.This AC/DC converter is suitable for operation in the range of 8V~20V supply voltage (Vcc/Vdd).In total, it has 8 terminations.There are 8 pins on the ac/dc converter.The ac dc converters is suitable for mounting by Through Hole .It belongs to a manufacturer family of FPS? .A similar acdc converter can be searched by using the FSQ0370 family.There are 1 outputs to run.Switching Regulator or Controllers includes the ac to dc conversions.There is 1.1A output current set.As long as AC to DC converter is operated at frequency 100kHz ,it is capable of attaining high efficiency.Here is the standard for REACH SVHC : No SVHC .An input voltage of 265V is available for powering the AC to DC converter.A voltage of less than 85V V can be used with the AC to DC inverter.AC to DC converter can handle a maximum supply current of 5mA .It is recommended to keep the voltage (AC) that can be applied to the AC to DC power converter below 265V .This power AC DC's resistance can be determined to be 4Ohm .With a maximum output power of 19W , the AC to DC power converter can be used.
FSQ0370RNA Features
Packaged with 8-DIP (0.300, 7.62mm)
With 8 pins
Output Current at 1.1A
Resistance : 4Ohm
FSQ0370RNA Applications
There are a lot of ON Semiconductor FSQ0370RNA AC DC Converters applications.
- Standby Power for General Off-Line Applications
- Shaver Charger
- Battery chargers for cellular phones
- Appliances
- Home appliances
- Wireless System
- Automotive Clusters
- Small off-line low voltage power supplies
- Battery Chargers
- Battery chargers for cordless