Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Through Hole |
Mounting Type |
Surface Mount |
Package / Case |
TO-220-6 Full Pack, Formed Leads |
Number of Pins |
6 |
Weight |
1.6g |
Operating Temperature |
-25°C~85°C TA |
Packaging |
Tube |
Published |
2006 |
Series |
FPS™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
2.6Ohm |
Terminal Finish |
Tin (Sn) |
Power (Watts) |
70W |
Additional Feature |
ALSO HAS CONTROL TECHNIQUE OF RESONANT |
Subcategory |
Switching Regulator or Controllers |
Power Rating |
48W |
Max Power Dissipation |
45W |
Terminal Position |
ZIG-ZAG |
Number of Functions |
1 |
Base Part Number |
FSQ0465 |
Number of Outputs |
1 |
Output Voltage |
5V |
Input Voltage-Nom |
15V |
Voltage |
265V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Nominal Supply Current |
3mA |
Current |
4A |
Power Dissipation |
45W |
Output Current |
1.6A |
Voltage - Supply (Vcc/Vdd) |
8V~20V |
Max Supply Current |
5mA |
Turn On Delay Time |
11.2 μs |
Control Features |
Sync |
Topology |
Flyback |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
48kHz~67kHz |
Max Input Voltage |
20V |
Control Technique |
PULSE WIDTH MODULATION |
Nominal Input Voltage |
20V |
Switcher Configuration |
SINGLE |
Max Output Power |
48W |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
Max Duty Cycle |
50 % |
Output Isolation |
Isolated |
Voltage - Start Up |
12V |
Min Breakdown Voltage |
650V |
Height |
16.07mm |
Length |
10.16mm |
Width |
4.8mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
FSQ0465RSWDTU Overview
In the package TO-220-6 Full Pack, Formed Leads , the ac to dc converter is embedded.You can get it in AC/DC power converter Tube .As you can see, this AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -25°C~85°C TA °C.This AC DC converter employs SWITCHING REGULATOR analog IC type.48kHz~67kHz is the switching frequency.This AC/DC converter is suitable for operation in the range of 8V~20V supply voltage (Vcc/Vdd).As a result, it has had 6 terminations.On this ac/dc converter, there are 6 pins.The ac dc converters is suitable for mounting by Through Hole .It is a member of FPS? manufacturer family.A similar acdc converter can be searched by using the FSQ0465 family.In this AC to DC transformer, there are 1 outputs to run.The ac to dc conversions are included in Switching Regulator or Controllers .It has been set to 1.6A for the output current.In this AC to DC transformer, the output voltage is 5V .In the following link, you will find the REACH SVHC standard: No SVHC .The AC to DC converter input voltage can be powered under 20V .As a result of using this ACDC converter, ALSO HAS CONTROL TECHNIQUE OF RESONANT can also be detected.The maximum supply current AC to DC converter can handle is 5mA .It can be determined that the resistance of this power AC DC is 2.6Ohm .Using the AC to DC power converter with the maximum output power of 48W is possible.
FSQ0465RSWDTU Features
Packaged with TO-220-6 Full Pack, Formed Leads
Switching Frequency at 48kHz~67kHz
With 6 pins
Output Current at 1.6A
Resistance : 2.6Ohm
FSQ0465RSWDTU Applications
There are a lot of ON Semiconductor FSQ0465RSWDTU AC DC Converters applications.
- Power Adaptors
- Appliance Power Supplies
- Remotely-controlled appliances
- Off--line Battery Charger
- Battery chargers for cordless
- Low-Voltage I/O System Power
- Small off-line low voltage power supplies
- Set-top boxes
- Battery chargers for cellular phones
- Adapter for ADSL