Parameters |
Mounting Type |
Surface Mount |
Package / Case |
TO-220-6 Full Pack, Formed Leads |
Number of Pins |
6 |
Weight |
1.6g |
Operating Temperature |
-25°C~85°C TA |
Packaging |
Tube |
Published |
2006 |
Series |
FPS™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
1.6Ohm |
Terminal Finish |
Tin (Sn) |
Power (Watts) |
90W |
Subcategory |
Switching Regulator or Controllers |
Power Rating |
80W |
Max Power Dissipation |
45W |
Terminal Position |
ZIG-ZAG |
Number of Functions |
1 |
Base Part Number |
FSQ0765 |
Number of Outputs |
1 |
Operating Supply Voltage |
20V |
Input Voltage-Nom |
10V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Nominal Supply Current |
3mA |
Current |
2.5A |
Power Dissipation |
45W |
Output Current |
2.2A |
Voltage - Supply (Vcc/Vdd) |
8V~20V |
Max Supply Current |
5mA |
Turn On Delay Time |
27 ns |
Control Features |
Sync |
Topology |
Flyback |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
48kHz~67kHz |
Control Technique |
PULSE WIDTH MODULATION |
Nominal Input Voltage |
20V |
Turn-Off Delay Time |
63 ns |
Switcher Configuration |
SINGLE |
Max Output Power |
70W |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
Max Duty Cycle |
50 % |
Output Isolation |
Isolated |
Voltage - Start Up |
12V |
Min Breakdown Voltage |
650V |
Height |
16.07mm |
Length |
10.16mm |
Width |
4.8mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Through Hole |
FSQ0765RSWDTU Overview
In the package TO-220-6 Full Pack, Formed Leads , the ac to dc converter is embedded.There is a AC/DC power converter of Tube available.As you can see, this AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -25°C~85°C TA °C.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.The switching frequency reaches 48kHz~67kHz .Vcc/Vdd can be used within the range of 8V~20V supply voltage.It has a total of 6 terminations.The ac/dc converter has 6 pins.It are possible to mount thare ac dc converters by Through Hole .The product is acdc converter of the FPS? manufacturer family.If you select the FSQ0765 family, you will be able to search similar acdc converters.A total of 1 outputs are to be processed.The ac to dc conversions can be found in Switching Regulator or Controllers .Current output is set to 2.2A .You may read the REACH SVHC standard at No SVHC .When the supply voltage is 20V , the interface IC may conduct.There is a maximum current limAC to DC converter of 5mA for the supply.A resistance of 1.6Ohm can be determined for this power AC DC.With a maximum output power of 70W , the AC to DC power converter can be used.
FSQ0765RSWDTU Features
Packaged with TO-220-6 Full Pack, Formed Leads
Switching Frequency at 48kHz~67kHz
With 6 pins
Output Current at 2.2A
Operating Supply Voltage at the range of 20V
Resistance : 1.6Ohm
FSQ0765RSWDTU Applications
There are a lot of ON Semiconductor FSQ0765RSWDTU AC DC Converters applications.
- Charger
- White goods
- Adapters for Handheld Electronics
- PDAs
- Utility meters
- Switching AC-DC Adapter
- Linear Adapter Replacements
- Air conditioners
- Automotive Clusters
- AC/DC Adaptors/Chargers for E-books