Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Number of Pins |
8 |
Weight |
930mg |
Operating Temperature |
-25°C~85°C TA |
Packaging |
Tube |
Published |
2016 |
Series |
FPS™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin (Sn) |
Power (Watts) |
13W |
Subcategory |
Switching Regulator or Controllers |
Max Power Dissipation |
8W |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
FSQ100 |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Output Voltage |
650V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Nominal Supply Current |
1.5mA |
Power Dissipation |
1.4W |
Output Current |
475mA |
Voltage - Supply (Vcc/Vdd) |
7V~20V |
Max Supply Current |
3mA |
Input Voltage (Min) |
8V |
Topology |
Flyback |
Control Mode |
VOLTAGE-MODE |
Frequency - Switching |
67kHz |
Control Technique |
PULSE WIDTH MODULATION |
Switcher Configuration |
SINGLE |
Max Output Power |
8W |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Load, Over Temperature, Over Voltage |
Max Duty Cycle |
74 % |
Duty Cycle |
67% |
Output Isolation |
Isolated |
Voltage - Start Up |
9V |
Min Breakdown Voltage |
650V |
Height |
3.3mm |
Length |
10.15mm |
Width |
6.35mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
FSQ100 Overview
The ac to dc converter is embedded in 8-DIP (0.300, 7.62mm) package.The AC/DC power converter Tube is available for this product.It is mounted in the way of Through Hole .The ac dc converter needs to be operated at -25°C~85°C TA °C in order to perform.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.In this AC to DC transformer, the switching frequency is 67kHz .It can be used within the range of 7V~20V supply voltage (Vcc/Vdd).As a result, it has had 8 terminations.There are 8 pins on this ac/dc converter.It are possible to mount thare ac dc converters by Through Hole .It belongs to the manufacturer family of FPS? .A similar acdc converter can be searched by using the FSQ100 family.The number of outputs to run is 1 .The following ac to dc conversions are contained in Switching Regulator or Controllers .The output current is set to 475mA .There is 650V output voltage from this AC/DC converter.AC to DC converter can handle a maximum supply current of 3mA .AC to DC power converters with a maximum output power of 8W can be used.
FSQ100 Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 67kHz
With 8 pins
Output Current at 475mA
FSQ100 Applications
There are a lot of ON Semiconductor FSQ100 AC DC Converters applications.
- Replaces linear transformers
- Standby Power for General Off-Line Applications
- Power Adaptors
- Cellular phone chargers
- Set-top boxes
- AC/DC Adaptors/Chargers for Cordless Phone
- 3.3V power supplies
- MP3
- LED lights
- Standby Power Supplies