FSQ321
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 851mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | FPS™ |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 12W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 89.3kHz |
| Base Part Number | FSQ321 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Input Voltage-Nom | 15V |
| Interface | Parallel |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 3mA |
| Power Dissipation | 1.5W |
| Output Current | 530mA |
| Voltage - Supply (Vcc/Vdd) | 8V~20V |
| Max Supply Current | 5mA |
| Control Features | Sync |
| Input Voltage (Min) | 9V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 55kHz~67kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Max Output Power | 10W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 13.5 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 12V |
| Min Breakdown Voltage | 650V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.67mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FSQ321 Overview
The ac to dc converter is embedded in 8-DIP (0.300, 7.62mm) package.You can get it in AC/DC power converter Tube .The AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~85°C TA in order to ensure its performance.An analog IC of type SWITCHING REGULATOR is employed in this AC DC converter.When the switching frequency reaches 55kHz~67kHz , the process is complete.A range of 8V~20V supply voltages (Vcc/Vdd) can be used.A total of 8 terminations have been recorded.There are 8 pins on the ac/dc converter.Through Hole are the recommended mounting method for the ac dc converters.This AC to DC converter belongs to the FPS? family of manufacturers.You can search similar acdc converters based on FSQ321 family.There are 1 outputs to be processed.The ac to dc conversions can be found in Switching Regulator or Controllers .The output current is set to 530mA .The voltage output by this AC/DC converter is 700V .High efficiency can be achieved when AC to DC converters frequency is set to 89.3kHz .Approximately 5mA amps of supply current can be handled by the power AC DC.The AC to DC power converter can be used with the max output power of 10W .
FSQ321 Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 55kHz~67kHz
With 8 pins
Output Current at 530mA
FSQ321 Applications
There are a lot of ON Semiconductor FSQ321 AC DC Converters applications.
- LED Driver
- Battery chargers for cordless
- Portable Apparatus
- Cellular phone chargers
- Charger
- Consumer electronics
- Low power ac?dc Adapters for Chargers
- Battery chargers for cellular phones
- Home Appliance Applications
- Switching AC-DC Charger
