FSQ321L
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD, Gull Wing |
| Number of Pins | 8 |
| Weight | 710mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2015 |
| Series | FPS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 19Ohm |
| Terminal Finish | Tin (Sn) |
| Power (Watts) | 12W |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 14W |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 89.3kHz |
| Base Part Number | FSQ321 |
| Number of Outputs | 1 |
| Output Voltage | 650V |
| Max Output Current | 600mA |
| Input Voltage-Nom | 15V |
| Interface | Parallel |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 3mA |
| Current | 600mA |
| Power Dissipation | 1.5W |
| Output Current | 530mA |
| Voltage - Supply (Vcc/Vdd) | 8V~20V |
| Max Supply Current | 5mA |
| Output Power | 10W |
| Control Features | Sync |
| Max Output Voltage | 700V |
| Input Voltage (Min) | 9V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 55kHz~67kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Max Output Power | 10W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 13.5 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 12V |
| Min Breakdown Voltage | 650V |
| Height | 3.6mm |
| Length | 9.4mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
FSQ321L Overview
This ac to dc converter is embedded in package 8-SMD, Gull Wing .In Tube case, the ac dc converter is available.There is a mounting point for this AC/DC converter in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~85°C TA in order to ensure its performance.Analog IC type SWITCHING REGULATOR is utilized in this AC DC converter.When the switching frequency reaches 55kHz~67kHz , the circuit is closed.It can be used within the range of 8V~20V supply voltage (Vcc/Vdd).There are a total of 8 terminations.The ac/dc converter has 8 pins.It are possible to mount thare ac dc converters by Surface Mount .It is a member of FPS? manufacturer family.Similar acdc converters can be found using the FSQ321 family.A total of 1 outputs are available for processing.The ac to dc conversions are included in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 530mA .It produces a voltage of 650V .AC to DC converter is able to reach high efficiency when its frequency is 89.3kHz .It is possible to read the REACH SVHC standard at: No SVHC .Coverters generate 10W in terms of output power.Supply currents up to 5mA can be handled by this power AC DC.The resistance of this power AC DC can be determined to be 19Ohm .AC to DC power converters with a max output power of 10W may be used.
FSQ321L Features
Packaged with 8-SMD, Gull Wing
Switching Frequency at 55kHz~67kHz
With 8 pins
Output Current at 530mA
Resistance : 19Ohm
FSQ321L Applications
There are a lot of ON Semiconductor FSQ321L AC DC Converters applications.
- Tablets
- Chargers for cell/cordless phones
- Off--line Battery Charger
- Wireless System
- Replacements for bulky plug-in transformers
- AC/DC Adaptors/Chargers for Cell Phones
- AC--DC Adapter
- Battery chargers for cordless
- Rice Cooker
- Digital cameras
