Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SMD, Gull Wing |
Number of Pins |
8 |
Weight |
710mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2015 |
Series |
FPS™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
19Ohm |
Terminal Finish |
Tin (Sn) |
Subcategory |
Switching Regulator or Controllers |
Max Power Dissipation |
1.5W |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
250 |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
FSQ321 |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
13V |
Input Voltage-Nom |
15V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Nominal Supply Current |
3mA |
Power Dissipation |
1.5W |
Output Current |
500mA |
Voltage - Supply (Vcc/Vdd) |
8V~20V |
Max Supply Current |
5mA |
Output Power |
12W |
Turn On Delay Time |
7.77 μs |
Control Features |
Sync |
Topology |
Flyback |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
55kHz~67kHz |
Control Technique |
PULSE WIDTH MODULATION |
Nominal Input Voltage |
20V |
Switcher Configuration |
SINGLE |
Max Output Power |
10W |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Load, Over Temperature, Over Voltage |
Max Duty Cycle |
13.5 % |
Output Isolation |
Isolated |
Voltage - Start Up |
12V |
Min Breakdown Voltage |
650V |
Height Seated (Max) |
3.7mm |
Length |
9.2mm |
Width |
6.4mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
FSQ321LX Overview
In the package 8-SMD, Gull Wing , the ac to dc converter is embedded.There is a AC/DC power converter of Tape & Reel (TR) available.Surface Mount is mounted in the way of this AC/DC converter.For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~85°C TA °C.The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.The switching frequency reaches 55kHz~67kHz .It can be used within the range of 8V~20V supply voltage (Vcc/Vdd).There are a total of 8 terminations.On the ac/dc converter, there are 8 pins.Suitable mounting is provided by Surface Mount .A member of the FPS? manufacturer family, it has the following characteristics.Based on the FSQ321 family, you can search for similar acdc converters.AC to DC converter is necessary to run 1 outputs.AC to DC converter is contained in Switching Regulator or Controllers .AC to DC converter is set to 500mA for the output current.This is the standard of REACH SVHC : No SVHC .The output power of a coverter generates 12W .The interface IC conducts when the supply voltage is 13V .AC to DC converter is capable of handling a maximum supply current of 5mA A.A measurement of the resistance of this power AC DC indicates that it is 19Ohm .With 10W as the maximum output power, the AC to DC power converter can be used.
FSQ321LX Features
Packaged with 8-SMD, Gull Wing
Switching Frequency at 55kHz~67kHz
With 8 pins
Output Current at 500mA
Operating Supply Voltage at the range of 13V
Resistance : 19Ohm
FSQ321LX Applications
There are a lot of ON Semiconductor FSQ321LX AC DC Converters applications.
- Low-Voltage I/O System Power
- Power Adaptors
- Shaver Charger
- White goods
- Standby and Auxiliary Power Supplies
- 3.3V power supplies
- LED Driver
- Appliances
- Set -Top Box (STB) Power Supply
- Battery chargers for cellular phones